Examples of 'workpiece can' in a sentence
Meaning of "workpiece can"
workpiece can - This phrase is used to convey the capability or potential of a workpiece to undergo certain processes or actions. It indicates the workpiece's capacity to be manipulated, modified, or utilized in a particular manner
How to use "workpiece can" in a sentence
Basic
Advanced
workpiece can
Loss of control of a workpiece can cause injury.
The workpiece can be any solid material.
Make sure your workpiece can not slip.
The workpiece can become hot during grinding.
A spacer block slightly narrower than the workpiece can be.
The rotating workpiece can cause injury.
The program then enters a phase during which the workpiece can be machined.
Now the workpiece can be nickel plated.
A spacer block slightly narrower than the workpiece can be used to increase wheel.
The workpiece can move suddenly.
During welding and cooling your workpiece can deform due to stresses.
The workpiece can be very hot after having been machined.
During the ironing process the workpiece can become electrically charged.
A flying workpiece can be just as dangerous as a bullet or a spinning blade.
A measuring position is a spatial position of the machining head from which a workpiece can be sensed.
In such a way the workpiece can be operated by both hands.
Pay attention to proper tension, so that the workpiece can be pulled.
Note that the workpiece can get very warm.
Only with the above-mentioned movement values a high-accuracy calibration with blocked workpiece can be reached.
Each of the workpiece can define a though hole thereon.
Also consider the dangers which falling pieces of the workpiece can pose for other persons.
The underside of the workpiece can be greased instead of using a coolant.
The rotational direction of the grinding wheel and / or the workpiece can however be reversed.
The second workpiece can then be permanently secured to the first.
Applicable wide, metal workpiece can be heated.
The workpiece can be thrown at a very high speed in the direction of rotation.
Thereby, the position of a bend on a workpiece can be adjusted.
One printed workpiece can be turned into one or more packaging blanks.
After four or five days, the workpiece can be tried.
Each and every workpiece can therefore be collected without any effect on productivity.
Thereafter, the precision grinding operation on the workpiece can be automatically controlled.
The workpiece can be pushed against the saw blade with one or both hands.
Typically, the thickness of a workpiece can vary along the joint.
The workpiece can be thrown, causing serious injury.
Similarly, the temperature of the workpiece can be monitored and adjusted accordingly.
The workpiece can split, allowing fastener to fly free or ricochet, causing personal injury.
Once the wheel edge is worn, the workpiece can be ground in both directions.
The workpiece can be locally heated and work 24 hours a day.
A spacer block slightly narrower than the workpiece can be used to increase wheel utilization fig . 2.
The workpiece can reasonably be machined in less than 100 seconds.
What kind of workpiece can be moved ;.
By, the workpiece can be well removed later.
A few hours later, the workpiece can not be recognized!
Thus, the processed workpiece can be stably transported by the holder, and can be recovered.
In one clamping the workpiece can be machined on five sides.
Furthermore, the new workpiece can be loaded in the support while work is taking place.
Accordingly, the plate-shaped workpiece can be deformed with a relatively small load.
For example, the workpiece can be shifted relative to beam axis 26, as by moving support 16.
Such that the first workpiece can be fixed to the second workpiece.
The data required to machine a workpiece can be grouped into a workpiece project and archived.
