Examples of 'wrench to loosen' in a sentence
Meaning of "wrench to loosen"
This phrase refers to using a wrench or similar tool to loosen or unscrew a bolt, nut, or other fastener. It implies applying force in a turning motion to release and remove the fastener
How to use "wrench to loosen" in a sentence
Basic
Advanced
wrench to loosen
Do not use torque wrench to loosen fasteners.
Use a wrench to loosen and remove the connector from the feed tube.
You would need a hefty wrench to loosen those pipes.
Use a wrench to loosen blade fastening screws.
You can use the included wrench to loosen the ring.
Use the hex wrench to loosen the screw which secures the punch.
You may need to use the wrench to loosen the nut.
Then use a wrench to loosen and remove the cables from the terminals.
Next, use the collet wrench to loosen the.
Use the hex wrench to loosen the three screws which hold the cutting head.
With the saw head up, use the wrench to loosen.
Use the ring wrench to loosen the nuts.
Vents the blade from rotating . 3.Use the provided hex wrench to loosen the hex.
Use an adjustable wrench to loosen the leveling legs.
Use Allen wrench to loosen set screw which holds fan blade to motor shaft.
See also
To adjust, use the supplied wrench to loosen the lock nuts.
Use the hex wrench to loosen the three screws which secure the cutting head.
Remove the battery pack, then use the hex wrench to loosen the blade release bolt.
Use the hex wrench to loosen the bolts which secure the die.
That has to be retaped. We take this wrench to loosen it up.
Use the second wrench to loosen the bolt at the bottom.
Prepare the elbow connection, First use a wrench to loosen the manifold female.
Use the ring wrench to loosen and remove the sealing ring.
N Use the combination wrench to loosen the screw 1.
Use the wrench to loosen and remove the left-hand thread blade screw clockwise.
Use the bit on the blade wrench to loosen the attachment screw.
The use of a wrench to loosen or tighten the nut / bolt is recommended.
Step 4, Use the line wrench and a second wrench to loosen and remove fittings.
Use hex wrench to loosen the four hex bolts, and then.
Use the 4 mm hex wrench to loosen the.
Use a 3/8 in . wrench to loosen the 8 retaining tab nuts holding the inlet panel in place.
The support leg functions as a wrench to loosen the sump, Figure 13.
Use 1/8 " allen wrench to loosen setscrew which holds fan to motor shaft see Figure 8.
N Use a screwdriver or the combination wrench to loosen the screw ( 1 ) on the handle.
Use the wrench to loosen the two hex bolts ( Fig . 3 ) . Do not remove the bolts.
First, use the hex wrench to loosen the bolt.
Use a 5 mm hex wrench to loosen the non-drive side bottom bolt 3 to 4 turns.
First use a hex wrench to loosen the screw.
Use the included L-type wrench to loosen the screws and pass cables through the bracket.
Use a spark plug wrench to loosen the spark plug.
Use an adjustable wrench to loosen and remove the nozzle.
Use an oil filter wrench to loosen the filter slowly.
We take this wrench to loosen it up.
Use a sparking-plug wrench to loosen the sparking plug.
Use the accessory socket wrench to loosen the zigzag width adjustment nut 2.
First use a hex wrench to loosen the screw . Fig.
Use a 5/8 " or adjustable wrench to loosen the compression nut on the manual water shutoff valve.
Step 2, Use the cross wrench to loosen all of the wheel bolts in the wheel.
Use a 3/32 inch Allen head wrench to loosen the two holding screws located on the diffuser.
Use the included wrench to loosen the nut ( G ) from the drive shaft H.
You'll also be interested in:
Examples of using Loosen
Show more
Loosen the screw at the rod extensions
Use a screwdriver to loosen the air shutter
Loosen the lower pin with a key
Examples of using Wrench
Show more
Blade wrench is stored in the switch handle
The day threw a wrench in our plans
Hex wrench for loosening control knobs
