Examples of 'wrench to tighten' in a sentence
Meaning of "wrench to tighten"
wrench to tighten: refers to using a tool, usually a wrench, to secure or fasten something tightly, often used in the context of mechanical or construction work
How to use "wrench to tighten" in a sentence
Basic
Advanced
wrench to tighten
Do not use a wrench to tighten the nut.
Depress the spindle lock button and use a wrench to tighten the.
Do not use a wrench to tighten the chuck.
Torque is determined by using a conventional torque wrench to tighten the lock nut.
Do not use a wrench to tighten the connection.
Start all antenna cable connections by hand before using the wrench to tighten.
Then we take this wrench to tighten this up.
Use a wrench to tighten the hose to the brass fitting.
You can use a standard crescent wrench to tighten the nut.
Use the hex wrench to tighten the bolt securely.
Connect the regulator to the gas cylinder and use a spanner wrench to tighten.
Use the pedal wrench to tighten the spindle.
Maybe whoever maintains the roll coaster uses a pipe wrench to tighten the nuts.
Do not use a wrench to tighten or loosen the chuck jaws.
Cover the propeller with a cloth and use an adjustable wrench to tighten the prop nut.
See also
Use the wrench to tighten the nut securely with clockwise.
Always use a correctly calibrated torque wrench to tighten critical fasteners on your bike.
Use the wrench to tighten the nut while holding the shaft firmly in place.
Depress the spindle lock button and use a wrench to tighten the hub of the wheel.
Use the lug wrench to tighten the nuts in the order shown.
All cylinder connections must be made using a wrench to tighten the POL fitting.
Use the included wrench to tighten the nut turning it anticlockwise.
DO NOT use open end wrench or socket wrench to tighten.
Use the hex key wrench to tighten the front screws.
While holding the spindle lock, use the provided open-end wrench to tighten the collet nut.
Use the cross wrench to tighten them lightly at this stage.
Do Not install in direct sunlight Do Not use wrench to tighten sump to head.
Use a torque wrench to tighten parts when specified tightening torques is required.
DO NOT use a lid wrench to tighten it.
Use the wrench to tighten the clamping nut securely and then release the spindle lockbutton.
After that, use a torque wrench to tighten the connection.
Et wrench to tighten the two screws 12.
Use the hex . socket wrench to tighten the hex.
Use a wrench to tighten the Pressing Screw another 3/4 turn.
Do not use brute force on the torque wrench to tighten a nut / screw.
Then use blade wrench to tighten the spindle clamping screw thoroughly.
The nuts are self locking, but you must use a wrench to tighten them completely.
Use a Hex wrench to tighten the gimbal centering screw.
First insert the Bertrand lens attachment, use the 2mm Allen wrench to tighten the screw.
Use the supplied hexagonal wrench to tighten screws when fastening wires to the terminal.
Secure with 5mm nut using a 3mm hex wrench and 8mm wrench to tighten securely.
Use the supplied hexagonal wrench to tighten and loosen the terminal screw of the amplifier.
When connecting cables to the terminals, use a torque wrench to tighten the terminals to 270 lbs . / in.
Use Allen wrench to tighten screw onto the flat on the shaft.
Use the provided 1/8 ” allen wrench to tighten set screw at top of handle.
Use a torque wrench to tighten the connection and do not exceed a torque of 40 Nm.
To avoid damage, never use a wrench to tighten the adapters more than 1/4 turn.
Wrench - Use wrench to tighten or loosen positive and negative terminal outputs.
NOTE Do not use wrench to tighten hose fitting.
Use a 2 mm hex wrench to tighten the push rod into the SwingLink.
You'll also be interested in:
Examples of using Wrench
Show more
Blade wrench is stored in the switch handle
The day threw a wrench in our plans
Hex wrench for loosening control knobs
Examples of using Tighten
Show more
Tighten the screw through the clips
I will just tighten these up for you
Tighten properly the connection block screws
