Examples of 'zero voltage' in a sentence
Meaning of "zero voltage"
zero voltage ~ A condition in an electrical system where there is no voltage present. It is used in the context of electricity and electronics
How to use "zero voltage" in a sentence
Basic
Advanced
zero voltage
The locking occurs also at zero voltage.
A zero voltage is applied to the electrodes.
The information is sent centered at zero voltage.
Zero voltage switching power supply.
This is called zero voltage switching.
Control of a composite bridge at zero voltage.
After the zero voltage is reached the transistor is switched on.
This signal has zero voltage.
A zero voltage should result if auxiliary valve operation is proper.
The off state also occurs at zero voltage.
Zero voltage protection.
The reference electrode provides a zero voltage point.
Zero voltage is measured.
It provides a reference that can be considered to have zero voltage.
This allows the zero voltage closing to be connected at each of the phases.
See also
It provides a point that can be considered to have zero voltage.
The zero voltage reference is the voltage applied to the sources in reading mode.
At the same time interval all bit lines are kept at zero voltage.
This is why the desirable zero voltage switching can not always be achieved.
Additionally the efficiency is even more increased by the zero voltage switching.
The first is using zero voltage switching for the charge switch turn off.
In these methods the potential performance capabilities of zero voltage switching are fully exploited.
Indicator of zero voltage in the contact system ;.
The voltage very rapidly goes from a substantially zero voltage to VBR.
S has a zero voltage level corresponding to a logic 0.
The system turns the rotor to obtain a zero voltage in the rotor winding.
Thereby, zero voltage switching is obtained.
The aim of the setting is to obtain a zero voltage A b in the end.
A zero voltage transient is illustrated to start at time equals 0 seconds.
Special features, protected against zero voltage.
Therefore, the zero voltage switching is performed.
Preferably, adjacent alternations are separated by sections of zero voltage.
Thus, particularly at zero voltage and at maximum voltage.
Thus, such transistors have a subthreshold conduction at a zero voltage.
When zero voltage is applied, the rod 3 returns naturally to a stable central position.
The method of claim 1 wherein an off-load voltage is a zero voltage or a low voltage.
The zero voltage corresponds to the voltage delivered when battery or accumulator 9 is totally discharged.
The technique discussed in particular consists in provide zero voltage switching ( zvs ) to controlled switches.
Zero voltage turn-on is achieved because the voltage across each transistor is slower to increase.
According to an embodiment, the first and second transistors have a subthreshold operation at a zero voltage.
Zero-voltage switching involves switching the active devices when there is zero voltage thereacross.
Particulars, Device protected against zero voltage.
Particulars, Device is protected against zero voltage Reset current time after a prolonged power loss.
To this end, the signal ALG corresponds to a zero voltage.
The Bank 1 Panel lights showing zero voltage and current and the Bank 1 Indicator.
Note 1, The batteries can not be charged if they were discharged to nearly zero voltage.
Note, The device has a zero voltage switch.
The output terminal S then delivers a signal in the low state, for example a zero voltage.
The generator 6 delivers either a zero voltage or a voltage of 3 volts.
The reference electrode 104 is preferably subjected to a zero voltage.
You'll also be interested in:
Examples of using Zero
Show more
Zero waste all parts of plant are used
Factories achieved zero waste for disposal
Zero to a hundred in just over ten seconds
Examples of using Voltage
Show more
Voltage drop due to use of extension cable
Information on the voltage is on the rating plate
Voltage measure switch for phase voltage
