Examples of 'adjusting dial' in a sentence
Meaning of "adjusting dial"
This phrase describes the action of modifying or changing the settings on a dial or control mechanism. It suggests the act of making fine adjustments or precise alterations to achieve a desired outcome, such as tuning a radio station or adjusting the temperature on a thermostat. It implies the act of manipulating a dial to achieve a specific setting or level
How to use "adjusting dial" in a sentence
Basic
Advanced
adjusting dial
Turn the adjusting dial counterclockwise to slide the.
The tool speed can be adjusted by turning the adjusting dial.
The speed adjusting dial can be turned only as.
The strokes per minute can be adjusted just by turning the adjusting dial.
Turn the adjusting dial to adjust saw chain tension.
The tool speed can be infinitely adjusted by turning the speed adjusting dial.
Use the adjusting dial to center the belt tracking.
The blows per minute can be adjusted just by turning the adjusting dial.
Set the thread tention adjusting dial to the smaller value.
A speed adjusting dial is provided so that maximum tool speed can be limited variable.
Release the cutting width adjusting dial to the left gently.
Turn the adjusting dial counterclockwise to release the saw chain tension.
The maximum air volume can be adjusted just by turning the adjusting dial.
Use the adjusting dial only after the switch trigger.
The revolutions and blows per minute can be adjusted just by turning the adjusting dial.
See also
Turn the cutting width adjusting dial to get desired position of the lower knife.
Workpiece to be cut Numberon adjusting dial.
Turn the cutting width adjusting dial to move the lower knife to the desired position.
Workpiece to be cut Number on adjusting dial.
Number on adjusting dial Blows per minute.
When you sew heavy or lightweight fabrics, turn the adjusting dial.
Number on adjusting dial Strokes per minute.
Breakage of saw chain, wear of the guide bar and breakage of the adjusting dial.
Adjusting dial The blows per minute can be adjusted just by turning the adjusting dial.
Workpiece to be cut Number on adjusting dial Wood 4 - 6.
Number on adjusting dial Revolutions perminute Blows per minute.
For normal sewing, set the adjusting dial at “ N ”.
Adjusting dial i Screwdriver o Rear cover p Screws a Brush holder cap s Socket wrench d Crank cap f Hammer grease.
Air volume adjusting dial Fig . 6.
The adjusting dial can be turned only as far as 5.
Adjust the speed adjusting dial only within the range of numbers 1 through 5.
Turn the adjusting dial without positive stops between 1 and 6 according to your work.
Turn the speed adjusting dial clockwise for higher speed, and counterclockwise for lower speed.
Use the adjusting dial only after the switch trigger returns to the “ OFF ” position.
The speed adjusting dial can be turned only as far as 6 and back to 1.
Turn the adjusting dial to " - " direction to release the saw chain tension.
Turn the adjusting dial to “ - ” direction to slide the.
Turn the adjusting dial to “ - ” direction to release the.
You'll also be interested in:
Examples of using Dial
Show more
It will dial the last number called
I must have hit speed dial by mistake
Dial with purple and yellow zones
Examples of using Adjusting
Show more
Adjusting the balance effects all sources
Proceed as for adjusting the left fence
Adjusting the white balance manually recommended
