Examples of 'adjustment screws' in a sentence
Meaning of "adjustment screws"
refers to the screws or mechanisms used to make fine-tuned changes or modifications to something, such as a machine or equipment
How to use "adjustment screws" in a sentence
Basic
Advanced
adjustment screws
Height adjustment screws provide vertical adjustment.
Mounting brackets with adjustment screws installed.
Depth adjustment screws provide horizontal adjustment.
Adjust with horizontal adjustment screws if necessary.
Limit adjustment screws are located on side panel.
Correct if necessary with the adjustment screws.
Turn roller adjustment screws to raise or lower.
Use a screwdriver to adjust the roller adjustment screws.
Use the three adjustment screws indicated by.
Clean and lubricate the height adjustment screws.
The adjustment screws can subsequently be removed.
Loosen the six adjustment screws.
The adjustment screws are factory adjusted.
There are two different adjustment screws for these angles.
The adjustment screws on the laser head can.
See also
Then loosen the three adjustment screws on the dome.
Three adjustment screws are used to level the instrument.
Remove toe grille to gain access to roller adjustment screws.
Tighten the adjustment screws properly.
Adjustment screws are too short.
Loosen the locking screw and tilt adjustment screws.
Perfectly fitting adjustment screws included in the scope of supply.
Adjust the position of the hood by means of the adjustment screws.
Turn roller adjustment screws to raise or lower refrigerator cabinet.
Process to prevent an accidental rotation of adjustment screws of a hanging bracket.
Tighten the adjustment screws and the attaching screws.
Correct the headlamp setting as necessary by means of the adjustment screws.
Turn both adjustment screws clockwise to tighten the belt.
Small adjustments can be made using the hood adjustment screws.
Turn the adjustment screws on the front of the pilot valves.
The rail halves are riveted together and use no adjustment screws.
Use the same adjustment screws to align the doors vertically.
Use some low pressure air to clear the adjustment screws.
Use the leveling adjustment screws to ensure the hood is level.
This adjustment may be carried out manually by means of adjustment screws.
Ensure the footplate adjustment screws are secure before resuming work.
Wedge the plates which are not in contact with the adjustment screws.
The height adjustment screws are on the front and rear support rails.
Loosen the longitudinal direction adjustment screws on the unit one turn.
The position of the cable is adjusted by acting on the two adjustment screws.
The throat plate includes four adjustment screws which raise or lower it.
A lead mallet may be needed for smaller machines without adjustment screws.
Positive stop adjustment screws have been provided on each side of the saw arm.
Adjust the pressure of the feed rolls by using the adjustment screws.
Locate the gimbal tension adjustment screws located on each axis of each gimbal.
Hang the hood on the hooks and level it with the adjustment screws.
There are usually two adjustment screws controlling the limits of lateral travel allowed.
This can be done by raising the range using the adjustment screws on the legs.
The adjustment screws preferably are rounded at the ends remote from the heads.
The risk of losing or damaging the adjustment screws can also be high.
You'll also be interested in:
Examples of using Adjustment
Show more
Adjustment for accrued income from investments
The single flow adjustment knob allows
Adjustment for other accruals and liabilities
Examples of using Screws
Show more
The screws are provided in the literature pack
Fully tighten screws with hex wrench
Screws are visible on the burner control panel
