Examples of 'aileron servo' in a sentence

Meaning of "aileron servo"

aileron servo: In aviation, an aileron servo refers to a component of an aircraft's control system that is responsible for operating the ailerons. Ailerons are hinged flight control surfaces mounted on the trailing edge of the wings, and the aileron servo helps move these surfaces up and down to control the aircraft's roll and banking movements

How to use "aileron servo" in a sentence

Basic
Advanced
aileron servo
Installing the aileron servo and snakes.
Preparing for installation of the aileron servo.
Connect the aileron servo to the receiver.
Reverse the direction of aileron servo.
Remove the aileron servo cover from the wing.
Connect the metal clevis to the aileron servo arm.
Guide the aileron servo extension into the opening.
Check the fi t of the aileron servo cover.
Center the aileron servo using the radio system.
Use the radio system to center the aileron servo.
Plug in aileron servo lead from wing into aileron.
Remove the cover for the aileron servo from the wing.
Extend the aileron servo leads using the extension leads stated in the foreword.
Attach the pushrod connector to the servo arm to the aileron servo arm.
Use the string to pull the aileron servo lead through the wing panel.

See also

Fit the servo between the servo mounting tabs in the aileron servo tray.
Secure the aileron servo in the wing using the screws provided with the servo.
Thread a screw into each of the holes in the aileron servo cover mounting holes.
Run the aileron servo lead and the extension lead to the rear under the servos.
Tie the string located in the wing around the end of the aileron servo extension.
Attach aileron servo to the Aileron channel of your receiver.
Allow the CA to fully cure before installing the aileron servo cover.
Place the aileron servo into position, guiding the lead through the wing.
Installing the motors, deploying the motor and aileron servo.
Secure the aileron servo using the hardware included with the servo and a 2mm hex wrench.
The default configuraton is Normal, which is a single aileron servo configuration.
Connect the aileron servo leads to the Y-lead, which is already plugged into the receiver.
Aileron, connect to the aileron servo.
Place the wing 's aileron servo connectors ( A ) into the rectangular hole in the fuselage.
Right-hand Sport wing panel excl . aileron servo and linkage.
Connect the aileron servo connectors to the included Y-harness ( G ) in the fuselage.
AILE / Roll servo connection, Aileron, connect to the aileron servo.
Inside the fuselage, connect both aileron servo connectors to the aileron Y-harness.
Connect the included Y-harness ( C ) to the aileron servo connectors from the wing halves.

You'll also be interested in:

Examples of using Aileron
Move the aileron stick to the right
The model is designed for aileron control
Move the aileron stick to the left
Show more
Examples of using Servo
Woofer servo for reduced woofer distortion
Run your full servo and arming
Servo mode partial light output settings
Show more

Search by letter in the English dictionary