Examples of 'elevator servo' in a sentence
Meaning of "elevator servo"
elevator servo: A mechanism in an elevator responsible for controlling its movement
How to use "elevator servo" in a sentence
Basic
Advanced
elevator servo
Position the elevator servo in the fuselage.
Reverse the direction of elevator servo.
Mount the elevator servo horn in the elevator.
To adjust the aileron and elevator servo centers.
Center the elevator servo using the radio system.
Use the radio system to center the elevator servo.
Rudder and elevator servo installation.
Remove the servo arm from the elevator servo.
Place the elevator servo just behind the rudder servo.
Turn on the radio system and center the elevator servo.
Glue the elevator servo and the switch harness in the fuselage.
Connect the pushrod to the output arm of the elevator servo.
Route the extension for the elevator servo through the fuselage.
Make sure to use the slot that aligns with the elevator servo.
Connect the lead from the elevator servo to the extension in the fuselage.
See also
Connect the clevis to the innermost hole in the elevator servo output arm.
Prepare the elevator servo by installing the rubber grommets and brass eyelets.
Turn on the radio and center the elevator servo using the radio system.
Center the elevator servo and temporarily attach the servo arm perpendicular to the servo.
Thread a servo mounting screw into each of the holes in the elevator servo mounting holes.
Mount the elevator servo in the fuselage using the hardware provided with the servo.
The next step before continuing with the rudder and elevator servo is the tail unit.
Prepare the fuselage for the elevator servo by marking and drilling the servo mounting screws.
Use a 1 Phillips screwdriver to tighten the screws securing the elevator servo.
Connect both elevator servo connectors to the extensions in the fuselage labeled ELEV.
Elevator, connect to the elevator servo.
With the elevator servo centered, adjust the clevises so the elevator is centered.
ELEV / Nick servo connection, Elevator, connect to the elevator servo.
Attach the Z-bend of the 653mm pushrod to the elevator servo horn.
You'll also be interested in:
Examples of using Elevator
Show more
Elevator pod in the middle of the forest
I sure wish that elevator would hurry up
An elevator got stuck with sick women
Examples of using Servo
Show more
Woofer servo for reduced woofer distortion
Run your full servo and arming
Servo mode partial light output settings
