Examples of 'allen screw' in a sentence
Meaning of "allen screw"
Allen screw: An allen screw, also known as an allen bolt or socket head cap screw, is a type of fastener that has a hexagonal socket in the head, which requires an allen key (hex key) for tightening or loosening. These screws are commonly used in various assembly and repair projects where a secure connection is needed.
Show more definitions
- A screw whose head has a hexagonal socket.
How to use "allen screw" in a sentence
Basic
Advanced
allen screw
Loosen allen screw on fan and motor pulleys.
Push handwheel completely and tighten with allen screw.
Place shake proof washer on allen screw followed by flat washer.
This is done by simply dislocating the Allen screw.
Remove the Allen screw located in the.
Secure in place with the Allen screw.
Put the washer back on the Allen screw and tighten the screw securely.
It is particularly important to tighten the central Allen screw.
Remove the Allen screw on the lower end of the upper part of the footrests.
In the centre is a large Allen screw.
Also known as an Allen screw or Allen bolt, or simply a cap screw.
Loosen the counter nut on the Allen screw.
Did Allen screw his wife or anything?
Adjust the clearance and tighten the Allen screw.
Use the included Allen screw to unscrew screw 6 from the eccentric 7.
See also
Loosen and remove the Allen screw.
Did Allen screw his wife or anything? We're gonna do a full background check.
Tighten the centre Allen screw again.
Insert the Allen wrench into the adjustment hole to adjust the Allen screw.
Fix this position while gently locking the allen screw in the turntable-body's edge.
As for item 3 be careful to install two washers for each allen screw.
To adjust the riving knife, loosen the Allen screw which allows both the.
For this purpose the system comprises a gripping screw 19 in the form of an Allen screw.
Loosen the counter nut on the Allen screw by means of an jaw wrench SW 17.
Use an Allen key to turn the Allen screw.
Did Allen screw his wife?
Carefully tighten the Allen screw.
Retighten Allen screw after adjusting Figure 26.
Various lid screw head types, triangular, square and captive Allen screw available.
Did Allen screw his wife or anything? Did Cheney have anything against Allen?
After adjusting, firmly tighten Allen screw 8.
Tighten the allen screw using the hex wrench ( 9 ) supplied.
This locked position can be maintained by tightening of the Allen screw 28.
Insert the allen screw ( 8 ) into the screw hole in the spindle.
When the adjustment has been carried out, re-tighten the Allen screw.
Use the Allen screw on the unit to fix it to the tube fig . 12.
Aiming simplified by indicator on stirrup, locked via central 8mmØ Allen screw.
Also a further, smaller Allen screw 23 can be seen, situated towards the front of the housing 18.
To adjust the back angle, please undo the Allen screw ( 1 ) and remove it.
Loosen the Allen screw ( 7 ) using the Allen key.
Unscrew the centre Allen screw 80.
Tighten the Allen screw ( 7 ) using the Allen key.
