Examples of 'grounding screw' in a sentence
Meaning of "grounding screw"
grounding screw - a type of screw used to ground electrical devices and components for safety purposes
How to use "grounding screw" in a sentence
Basic
Advanced
grounding screw
Connect grounding lead to grounding screw provided.
Ground grounding screw romex connector.
Both wiring compartments are equipped with a grounding screw.
There is one grounding screw on the bottom side of.
Both sides of the heater include a grounding screw.
The grounding screw is connected to the bottom plate.
Each power receptacle shall have a ground conductor connected to a grounding screw.
A grounding screw is provided on the back in the junction box.
Remove the green grounding screw from the lower end.
Connect the supply grounding wire to the green grounding screw provided.
Use the grounding screw to attach the grounding wire.
Make sure the unit is properly grounded by using the grounding screw.
Loosen the grounding screw and remove the washer and cable shoe.
Connect black to blue, white to brown, and green or bare wire to grounding screw.
Remove the green grounding screw from the lower end of the grounding strap.
See also
Inside junction box, attach ground wire under head of grounding screw and tighten.
Connect the grounding screw provided in the wall can to the supply ground wire.
Thereby, the strain on the grounding screw can be relieved.
Grounding screw Sets or removes the grounding bridge.
Remove the green lead from the green grounding screw on the wiring compartment barrier.
Attach one terminal lug ( packaged with this manual ) using the green grounding screw.
Tighten the grounding screw firmly, but do not overtighten.
Wrap ground wire from fixture around green grounding screw (P) leaving enough excess.
A M8 grounding screw is available on the bottom plate for grounding the voltage transformer.
Connect supply ground wire to grounding screw in wall can See Figure 3.
Connect the Green ( Green and Yellow ) ground wire under the Green grounding screw.
The clamping plate includes a grounding screw 57 which is pressfit into a hole in the plate.
If you have a metal junction box, it must be grounded . ( Use a grounding screw or clip . ) 6.
Shield to green grounding screw External grounding screw, only for ATEX flameproof enclosure.
Two grounding emboss & grounding screw.
Use the green grounding screw ( B ) to attach the green wire ( G ) on top of grounding strap.
Connect the ground conductor ( yellow / green ) to the grounding screw on the switch box mounting plate.
Install the grounding screw ( 4 ) and connect all the wire harnesses 5.
Connect the ground conductor ( yellow / green ) to the grounding screw on the X1M terminal.
Green wire-to grounding screw on shell 4.
Grounding emboss on 12126 grounding hole on larger sizes grounding screw provided with each size.
You'll also be interested in:
Examples of using Screw
Show more
Tighten the screw through the clips
Screw the two sections of pole together
Remove the screw on the rear coupler
Examples of using Grounding
Show more
Grounding you is not just about punishment
Connect copper grounding wire to motor bracket
Grounding conductor can result in a risk of electrocution
