Examples of 'annealing treatment' in a sentence
Meaning of "annealing treatment"
This phrase refers to a process used in materials science and metallurgy to enhance the properties of a material, typically by heating it and then slowly cooling it down. It involves the alteration of a material's structure and properties through controlled heating and cooling cycles
How to use "annealing treatment" in a sentence
Basic
Advanced
annealing treatment
Annealing treatment can complete the decomposition.
Various types of annealing treatment may be envisaged.
Annealing treatment methods suffer similar drawbacks.
Machining is followed by an annealing treatment with a programmed cycle.
An annealing treatment can also be necessary.
Drying treatment of the network structure may be performed by annealing treatment.
It is a recovery annealing treatment carried out at low temperature.
The obtained network structure can also be subjected to annealing treatment.
An annealing treatment of the ferrous parts is thus necessary.
It could probably be improved by an optimization of the annealing treatment for this alloy.
The annealing treatment is preferably performed in inactive or reductive atmosphere.
The desired red color was obtained with the aid of this annealing treatment.
The laser annealing treatment influences particularly the morphological properties.
The voltage behaviour is further improved when the sleeve undergoes a prior annealing treatment.
The implantation annealing treatment is then carried out as described above.
See also
The formation of these thin skinned membranes generally involved a final annealing treatment in hot water.
A solvent vapor annealing treatment was used to promote the mobility of the polymericchains.
Finally, some assemblies were given a stress relief annealing treatment.
The duration of the solution annealing treatment does not have a significant influence.
In fact, these photovoltaic properties are obtained only after a thermal annealing treatment.
After the annealing treatment the sensitivity of the annealed rods was determined as follows.
The deformation rate e following the annealing treatment is not less than 3.
Stress relief annealing treatment shifts the curve to higher temperature levels curve 6.
Therefore, all the cast iron rolls must undergo annealing treatment to release the stress.
The result is a poor annealing treatment and consequently scrap losses which are not negligible.
The formation of these dense-skinned membranes generally involved a final annealing treatment in hot water.
In addition, the annealing treatment of the sample was not carried out.
The deep-chill treatment is preferably performed within 24 hours after the solution annealing treatment.
Accordingly, the object of the thermal annealing treatment is to coarsen this texture.
The annealing treatment allows reduction or elimination of the mechanica1 stresses in the parts.
The latter necessitates a thermal annealing treatment for the material to be " rejuvenated ".
This annealing treatment is performed so that the material obtains similar properties as a non-heat-treatedmaterial.
The invention involves carrying out the annealing treatment following quenching after homogenization in two stages,.
Annealing treatment body & bonnet to guarantee the long durable lifetime & safe use ;.
Often this is during the post-weld annealing treatment given to most welded gamma-prime alloy fabrications.
The O-material annealing treatment is meant to soften the material forming the extruded hollow member.
The elastomers were optionally subjected to an annealing treatment for a period of 16 hours at 200 ° C.
The hot-rolled sheet annealing treatment is effective in improving magnetic properties.
The contacts are subjected to an annealing treatment at about 400 ° C.
This first annealing treatment corresponds to step 2 in FIG . 1.
Annealing It is effected under standard annealing treatment conditions for INCONEL 718, that is to say,.
This second annealing treatment corresponds to step 3 in FIG . 1.
EXAMPLE 3 Example 2 is repeated, applying during the annealing treatment a constant, unidirectional pressure on the sample 10.
However, before this annealing treatment is effected, the layer MK2 of photoresist is eliminated.
The O-material annealing treatment is performed thereafter.
You'll also be interested in:
Examples of using Treatment
Show more
Helps in the early treatment of viral infections
Treatment of and procedures for recognizing refugees
People starting treatment in the reporting year
Examples of using Annealing
Show more
Spare parts for annealing furnace pressing
Annealing of flat glass and of container glass
The surface is flattened by annealing at high temperatures
