Examples of 'annealing temperatures' in a sentence
Meaning of "annealing temperatures"
annealing temperatures: The specific temperatures at which a material, typically metal or glass, is heated and then cooled to alter its properties. This term is often used in the fields of metallurgy and materials science
How to use "annealing temperatures" in a sentence
Basic
Advanced
annealing temperatures
The method to be used even at high annealing temperatures.
The annealing temperatures were optimized for each primer combination.
Comparison of activities at different annealing temperatures.
Annealing temperatures can be adjusted depending on the length of homology.
Oligonucleotide sequences and annealing temperatures are available upon request.
This risk is particularly apparent at relatively high annealing temperatures.
The annealing temperatures of the primers were optimised to suit each reaction.
We studied the substrate influence and the effect of differents annealing temperatures.
High annealing temperatures results in a fully austenitization and grain growth.
This requirement contributes to the motivation for use of lower annealing temperatures.
Appropriate annealing temperatures for any oligonucleotide can be determined empirically.
Also the mannitol hydrate peak decreases when the samples are subjected to higher annealing temperatures.
Higher annealing temperatures will tend to accelerate the reaction of free radicals.
Longer primers with higher Tms allow higher annealing temperatures.
Optimum annealing temperatures may be determined empirically and may be higher than predicted.
See also
PCR conditions were generally consistent across loci with adjustments made to annealing temperatures.
Primer annealing temperatures and primer annealing positions on published sequences are indicated in brackets.
Fig . 2 is a graph showing amounts of induced anisotropy over a range of annealing temperatures.
Conventional annealing temperatures frequently cause precipitation of alloying ingredients such as manganese during recrystallization.
The samples had the following secondary annealing temperatures and polymer blends,.
Annealing temperatures were optimized using the temperature gradient program provided with the iCycler software.
Fig . 4 is a graph showing respective ring down characteristics obtained over a range of annealing temperatures.
Annealing temperatures for each primer sets must be optimized to work correctly within a single reaction.
The method of claim 1, wherein said primer binding sites have different annealing temperatures.
Generally, higher annealing temperatures allow shorter times.
Such adjustments can avoid substantial changes to the bending and / or annealing temperatures of the glass.
The annealing temperatures and times for processing the Ta-Si metal are described above.
They also require elevated deposition temperatures and / or high annealing temperatures to achieve high conductivity levels.
Primers and annealing temperatures are provided in Table 1.
Within the known sequence, TAIL-PCR uses a nested pair of primers with differing annealing temperatures.
Specific annealing temperatures are provided in Table 2.
Rapid protocols use momentary or “ 0 ” second holds at the denaturation and annealing temperatures.
Annealing temperatures for specific primer pairs and amplimer sizes are presented in Table 2.
Table 2, Amplimer sizes and annealing temperatures.
Annealing temperatures are given in Table 1.
This is also illustrated by the final annealing temperatures of the curves 52 and 53.
These annealing temperatures are based on annealing for about 1 to about 3 hours, preferably about 2 hours.
The ferrite content for the 2,5 % Cu is the same at both the annealing temperatures.
Thus, for genotyping, annealing temperatures are selected for optimizing rates of probe / target hybridization.
For example, Tl2O3 will decompose into Tl2O and O2 in the preferred range of annealing temperatures.
It was shown that different annealing temperatures [… ] result in very different low frequency Raman profiles.
The annealing temperatures T ′ and the cooling rates Vc are given in Table 5.
Table 16, Optimized MgCl2 concentrations and annealing temperatures of QM assays . Assay.
Typical annealing temperatures range from room temperature of about 20 °C to an elevated temperature of about 120°C.
More preferably annealing temperatures are above 55°C.
The annealing temperatures were 57°C in all instances.
The annealing temperatures ( T1, T2 ) and / or the annealing periods may in particular be different.
You'll also be interested in:
Examples of using Temperatures
Show more
Low temperatures have an effect on vehicle start up
Thermal readings show temperatures increasing rapidly
Temperatures at which the battery can be recharged
Examples of using Annealing
Show more
Spare parts for annealing furnace pressing
Annealing of flat glass and of container glass
The surface is flattened by annealing at high temperatures
