Examples of 'attachment screw' in a sentence
Meaning of "attachment screw"
attachment screw: This phrase refers to a type of screw or fastener used to secure objects together. It is commonly used in construction, carpentry, or manufacturing to join different components or parts
How to use "attachment screw" in a sentence
Basic
Advanced
attachment screw
Upper duct cover attachment screw locations.
Attachment screw holes for optional front and back location.
Be sure to retighten the attachment screw when finished.
Remove attachment screw and cover from junction box.
Use the bit on the blade wrench to loosen the attachment screw.
Remove the guard attachment screw from the guard.
Attachment screw between wall holder and the complete front part.
Push back the motor base and tighten the attachment screw.
The blade attachment screw must always be tightened by an authorised workshop.
Tuck the sides of the front panel behind the toekick attachment screw holes.
Insert an attachment screw into each of the four alignment holes.
The holder part and the fixture part can be linked together by an attachment screw.
The blade attachment screw should always be fitted and tightened by a specialist workshop.
The bevel stop overrides are held secure with their attachment screw to prevent inadvertent movement.
Remove the attachment screw and pull out the resistance knob from upright post.
See also
To set the speed, first remove the gear cover and loosen the attachment screw.
Apertures for receiving an attachment screw and an eccentric are provided on the holding plate.
It can, in particular, be tapped in order to receive an attachment screw 7.
LThe lower attachment screw is longer than the upper screw.
The bevel stop overrides ( N ) are held secure with their attachment screw to prevent inadvertent movement.
Back front attachment screw out several turns and slip Basepan Angle over screw head.
The attachment assemblies 2 include an attachment screw positioned in viscoelastic wedges.
FIG . 2 depicts three vertebrae each with a surgical rod attachment screw.
If required, loosen the attachment screw at the rear of the device.
The nut is screwed on to a matrix 6 held by an attachment screw 4.
Insert the guard attachment screw to secure the guard in place as shown in figure 5.
Tighten the protective grille with the attachment screw ( 2 ) supplied.
In this example, the attachment screw has a hex socket for attaching / opening the screw.
B Attach the MCM10 module at the top attachment screw.
Tighten the attachment screw ( 4 ) for the propeller in an anticlockwise direction.
The pin is held in position by a median shoulder 30 and by an attachment screw 31.
The opposite end portion of the attachment screw 6 is formed as a head portion 9.
An attachment screw 27 is also provided which connects the first clamp 7 to the base 25.
Tighten each blade attachment screw ( AA ) securely.
The first clamp 7 is removably associated with the base 25 through the attachment screw 27.
Loosen the attachment screw ( wing screw ) on the right side of the motor.
The rear part 4B has a projection 4D having a matching hole / holes 4F for the attachment screw 5.
Thereafter, the attachment screw 17 is tightened using a prescribed torque and tightening sequence.
Start a blade attachment screw ( AA ) into the decorative nut FF.
Release attachment screw ( only release, but do not remove! ) and adjust diameter.
This permits the wire attachment screw 342 to engage the patient 's bone at acute angles.
Then the attachment screw M3x12 can be tightened.
You'll also be interested in:
Examples of using Screw
Show more
Tighten the screw through the clips
Screw the two sections of pole together
Remove the screw on the rear coupler
Examples of using Attachment
Show more
Attachment on the right side factory default
Remove the attachment screws for the
Attachment measurement for wall hanging screws
