Examples of 'clamp screw' in a sentence
Meaning of "clamp screw"
Clamp screw: A type of screw used to secure or tighten objects together using a clamping mechanism
How to use "clamp screw" in a sentence
Basic
Advanced
clamp screw
Then tighten the clamp screw securely.
Clamp screw for locking holder.
The needle clamp screw is too loose.
Then tighten the needle clamp screw.
Tighten clamp screw securely if needed.
Tighten the needle clamp screw firmly.
Use a screwdriver to securely tighten the needle clamp screw.
Loosen needle clamp screw and remove.
Tighten the blade holder clamp screw.
Loosen the needle clamp screw q by turning it counterclockwise.
Loosen and remove the clamp screw.
Loosen casing clamp screw on carburetor or control plate.
Rear brake caliper clamp screw.
Needle clamp screw too loose.
Front brake caliper clamp screw.
See also
Tighten the needle clamp screw firmly by turning it clockwise.
Loosen water tube clamp screw.
Loosen the needle clamp screw by turning it counter clockwise.
Secure the cable by fastening the clamp screw.
Tighten the clamp screw when done.
Securely tighten the upper blade clamp screw.
Remove the wire clamp screw and the three.
Loosen but do not remove the well clamp screw.
Tighten the blade clamp screw back into place.
Secure the sensor head by tightening the clamp screw.
Tighten the needle clamp screw securely.
Loosen the clamp screw of the side grip by turning it counterclockwise.
Loosen the cable clamp screw and the.
Fix the cable in place by fastening the clamp screw.
Loosen the needle clamp screw by turning it toward you.
Loosen the gearcase clamp screw.
Loosen needle clamp screw and take out needle.
Close the clamp and tighten the clamp screw.
Turn the worm gear clamp screw counterclockwise to loos.
Remove the igniter and fl ame sensor clamp screw.
Tighten the needle clamp screw with the screw driver.
Swing the sensor head towards the clamp screw.
Unscrew the wire clamp screw and the contact screws.
Clamp screw diameter mm.
Tighten the needle clamp screw with the.
Push nozzle over heater assembly and tighten clamp screw.
It is secured with a clamp screw on the designated indentation on the shaft.
Close the clamp or tighten the clamp screw firmly.
Loosen the clamp screw so it can slide along the shaft.
Hold the needle and loosen the needle clamp screw.
Make sure that the needle clamp screw is firmly tightened.
Remove the tape measure by loosening the plastic clamp screw.
Firmly tighten the clamp screw on the turn base so that.
Place the tool on its side and loosen the clamp screw.
Tighten the needle clamp screw firmly with the screw.
