Examples of 'auger drive' in a sentence
Meaning of "auger drive"
Auger drive: A mechanism used to power and operate an auger, a tool or drill used for boring holes. This phrase is commonly used in the context of construction, agriculture, or industrial settings
How to use "auger drive" in a sentence
Basic
Advanced
auger drive
To ensure auger drive must be in outside of hole.
Check the adjustment of the auger drive cable.
Auger drive guide is out of adjustment.
Do not engage the auger drive for this test.
Auger drive belt is out of adjustment.
The header is equipped with an auger drive sprocket to match the combine.
Replace auger drive belt by following instructions in reverse order.
The traction drive cable and the auger drive cable are adjusted at the factory.
The auger drive lever 's cable is adjusted at the factory.
Unhook the cable at the auger drive lever 5.
Actuate the auger drive lever and observe the tension.
If it is correct, then check the condition of the auger drive belt.
Adjust auger drive belt ; replace if damaged.
With the aid of an assistant, engage the auger drive clutch.
If the auger drive belt is loose, adjust as follows.
See also
If the adjustment is correct, then check the condition of the auger drive belt.
If the auger drive belt is damaged, replace the auger drive belt.
STEP 7 Adjustments Traction drive Do not engage the auger drive for this test.
Remove the auger drive belt from the clutch / idler assembly.
If the auger does not start even though the auger drive lever 5, 9.
If the auger drive belt is damaged, the snow thrower will not discharge snow.
Check that the auger drive lever 9.
When the auger drive belt is adjusted or replaced, check and adjust the cable.
If the auger continues to rotate even though the auger drive lever 5, 9.
Remove the auger drive belt from the clutch / idler assembly and from the spiral auger housing.
Start the auger and propulsion by activating the auger drive lever 5, 9.
Auger Drive Clutch Lever - Used to engage and disengage the auger and impeller.
Stop working by releasing the auger drive lever 5, 9.
When the auger drive lever is activated, the play between belt guide 14.
Upon start up of the auger drive motor 213, ball agitator will automatically be operated.
Auger drive lever ( M ) - Starts and stops the auger / impeller which propels the snow thrower.
The auger drive belt ( K ) is shown in fig.
Refer to Auger Drive Sprockets, page 190 for procedure for changing sprockets.
Refer to Auger Drive Sprockets, page 190 for instructions on changing the sprocket.
Check auger drive chain tension - refer to Adjusting Auger Drive Chain Tension, page 189.
