Examples of 'auger housing' in a sentence
Meaning of "auger housing"
The auger housing refers to the protective cover or casing that encloses the auger, a drilling tool used for boring holes. It provides safety by enclosing the rotating auger and prevents debris from escaping during the drilling process
How to use "auger housing" in a sentence
Basic
Advanced
auger housing
If the auger housing or discharge chute is blocked and.
The rear of the auger housing.
Rinse the auger housing and wheels with a garden hose.
Clean discharge chute and inside of auger housing.
Clean the auger housing thoroughly to remove all pellet dust.
The shave plate is attached to the bottom of the auger housing.
Adjust auger housing height to clear gravel or crushed rock surfaces.
Stand the snow thrower on the front of the auger housing.
If the auger housing or discharge chute is blocked and must be cleaned.
Set up the machine on the auger housing and set the gear.
Tilt the snow thrower back enough to raise the auger housing.
Pull the spiral auger housing assembly off of the tractor.
The skid shoes are mounted on each side of the spiral auger housing.
Operate the auger housing control switch to raise the auger a little.
The chute clearing tool is located in a holder on top of the auger housing.
See also
Set up the machine on the auger housing and set the ger.
The skid can be installed at the rear or side of the auger housing.
Used to set the height of the auger housing above the ground.
The discharge auger housing is also pivotally connected to the tailgate vÃa a third pivotal connection.
Unhook the idler spring from the hex bolt on the auger housing.
Adjust the height of the auger housing to ensure it stays above gravel paths.
Drift cutters are used to cut a path through snow deeper than the auger housing.
Snow drawn into the auger housing is discharged out the chute assembly.
Never use your hands to clean snow and ice from the chute or auger housing.
Clear the discharge chute and auger housing of obstructions page 8.
Use the infinitely variable height adjust lever when changing the height of the auger housing.
Clean chute and inside of auger housing with clean-out tool or a stick.
Use the clean-out tool to remove snow from the auger housing.
When the ICS switch is on, the auger housing automatically rises during reversing.
When engaged, the augers rotate and draw snow into the auger housing.
Track models, Lower the auger housing so the skids rest on the vehicle floor.
Remove the carriage bolts, washers and hex nuts which attach it to the auger housing.
Adjust the auger housing height in the proper position see page 51.
For close snow removal on a smooth surface, raise skid shoes higher on the auger housing.
Do not place your hands in the auger housing ( 4 ) or the discharge chute 3.
Remove the auger drive belt from the clutch / idler assembly and from the spiral auger housing.
The auger 28a is disposed in the auger housing 26a for rotation.
On some models, a clean-out tool ( 1 ) is attached to the top of the auger housing.
Remove the two ( 2 ) screws securing the auger housing to the pallet.
Remove packing material from wheels, handle, and auger housing.
Skid Shoe - Used to adjust ground clearance of auger housing.
Remove the two ( 2 ) screws securing the auger housing.
The hopper 24a communicates the mass of chocolate to the auger housing 26a.
Loosen the carriage bolts and nuts that hold the scraper bar ( 15 ) to the auger housing 4.
You'll also be interested in:
Examples of using Housing
Show more
Improved land and housing policies implemented
Housing systems for other livestock categories
Proportion of makeshift housing at the national level
Examples of using Auger
Show more
Dismantle the auger belt as described above
Auger blades and drilling points are sharp
Check the auger paddles for wear
