Examples of 'bending radius' in a sentence
Meaning of "bending radius"
Bending radius: The minimum radius a cable or wire can be bent without damaging it. This term is commonly used in engineering, construction, and manufacturing industries
How to use "bending radius" in a sentence
Basic
Advanced
bending radius
Dimensions the inner bending radius of the sheet.
Bending radius of signal and field current cable.
The widest possible bending radius must be used.
The bending radius should not be too small.
Higher flexibility and bending radius.
Such a bending radius is obtained by machining.
Fiber optic cable bending radius.
The limit bending radius rlim with no cracks was measured.
Make sure that the smallest bending radius is not exceeded.
This minimum radius of curvature was evaluated as the limit bending radius.
Smallest bending radius permitted.
The shape of the groove will determine the bending radius.
Bear in mind the maximum bending radius of the optical fiber.
The bending radius is measured through the inside of the hose arch.
Flexible design with good bending radius to ease cable management.
See also
The use of smaller veneer units allows reduction of the bending radius.
This is the inner bending radius of the zigzag shaped strut.
The curved portions have the above mentioned predefined minimum bending radius.
Has a flexible design with good bending radius to ease cable management.
The minimum bending radius prescribed for the respective cable is to be observed.
The bend thus shows an abrupt variation of bending radius on the outside.
The bending radius directly affects the hose length and is calculated as follows.
This is due to the minimum permitted bending radius of the power supply line.
The belt bending radius is slightly larger than the radius of the drive ring.
Refer to the table below for the bending radius of each connection pipe.
The bending radius of the ropes sets limits for the overall structure of the elevator.
It is possible to bend sheets with a bending radius that varies along their length.
Inner bending radius Defines to which inner bending radius the allowances apply.
For an edgewise bending a far larger bending radius is required than for a flat bending.
Inner bending radius This is the inner bending radius of the zigzag shaped strut.
Special characteristics Very small bending radius.
I never exceed the minimum bending radius specified for the particular hose type.
This arc of a circle itself also has the same bending radius R.
The elongate member limits bending radius without impeding the required flexibility of the hose.
Therefore, the cloth tube must first provide sufficient bending radius.
Measuring unit for measuring the bending radius and the forwarding of a workpiece in a bending machine.
A sample was cut with a minimum length of 6 times the target bending radius.
R Minimum bending radius specified by the manufacturer.
Accordingly, a cylindrical shaped stent with a small bending radius could be reasonably manufactured.
Test Methods Bending Radius Samples are evaluated to determine their minimum bend radius.
In that example, the height of the bending head correlates to the bending radius.
In the table R represents the bending radius and t the sheet thickness.
The bending radius of cable is recommended as following,.
It has a minimum bending radius of 5 meters.
Small bending radius single-mode optical fiber with compatibility.
In this way good load-bearing capability is achieved with a small bending radius.
The bending radius selected shall be 5 mm.
Also, the microduct is preferably constructed such that its bending radius is limited.
In this way, the bending radius gets smaller each time.
Our production of drag chain cable bending radius of 8D.
You'll also be interested in:
Examples of using Bending
Show more
Steam bending is a traditional process steeped in history
Exceptional inverse bending test fatigue strength
Bending over in them tight little clamdiggers
Examples of using Radius
Show more
Ideal blast radius for maximum casualties
He will want to be clear of the blast radius
And that radius is expanding every minute
