Examples of 'bending strength' in a sentence
Meaning of "bending strength"
This refers to the ability of a material or structure to resist bending or deformation under a load or force. It measures the maximum amount of stress a material can withstand without breaking or permanently deforming
How to use "bending strength" in a sentence
Basic
Advanced
bending strength
Fine bending strength and flexibility.
Other tests relate to the bending strength of card bodies.
Bending strength of web post.
Both the strength and bending strength decreased significantly.
Bending strength modulus of a ring.
This article is rigid and exhibits a poor bending strength.
The bending strength.
Higher amounts in certain cases result in a decreased bending strength.
Longitudinal bending strength.
Bending strength test.
The inventive particle board specifically features a high bending strength.
The lower limit of bending strength stability is not particularly limited.
Into a integrated unit and ensuring sufficient bending strength and stiffness.
The durability of bending strength of the cured products thereof was measured.
Testosterone increased bending stiffness but did not significantly increase bending strength.
See also
The bending strength is limited by stent design and material plasticity.
This is done to avoid adversely affecting bending strength of the beam at that point.
The bending strength was determined of six of the above current supply conductors.
No internal spars or fillers are necessary to provide additional bending strength during operation.
They improve the bending strength of the frames but present adhesion problems.
A structural liner may be considered to prevent leaks as well as provide additional bending strength.
The threshold for optimising bending strength and weight is simply at a different level.
This housing features thicker wall tubes and improved bending strength over stock.
The improvement in bending strength and stiffness is especially advantageous for curved needles.
The moment at which the sheet breaks determines the bending strength of the test piece.
The bending strength of the buckling layer is improved exclusively during the temperature rise.
The heat treatment weakens the bending strength of wood after a certain weight loss.
The bending strength of each molded article was evaluated based on the criteria described below.
The requirements of the nail anvil assembly for material plasticity and bending strength are contradictory.
Fibrous fillers can increase a bending strength in stretching direction of the sheet for the cards.
The innovative new material mix boasts excellent insulating properties and has a low bending strength.
The compressive and bending strength of the CSM may be varied using common fabrication techniques.
Larger flake has the potential to give particleboard higher bending strength and glue bond durability.
Bending strength according to the ROSS FLEX method.
Generally all indoor wood constructions will benefit from the increased mechanical properties like bending strength.
Bending strength of translucent polycrystalline alumina ceramic,.
Modulus of elasticity, bending strength and density were measured.
These same corrugations, however, result in a decrease in longitudinal bending strength.
Determination of bending strength by the three-point method.
Figure 2c shows a cross section of broken bending strength specimen.
Thereafter, its bending strength was measured using an autograph.
Thus, slate molded products excellent in bending strength can be obtained.
The bending strength of the product is also non-existent.
Thus, mortar molded products excellent in bending strength can be obtained.
The three point bending strength at room temperature was 3 MPa.
The narrower the slits, the greater the transverse bending strength.
Accordingly, the bending strength of each of the communicating tubes 6 is enhanced.
Therefore, the nail anvil assembly needs to have a high bending strength.
Consequently, the bending strength of each of the communicating tubes 6 is enhanced.
The strength decreased slightly ; however, the bending strength significantly increased.
You'll also be interested in:
Examples of using Bending
Show more
Steam bending is a traditional process steeped in history
Exceptional inverse bending test fatigue strength
Bending over in them tight little clamdiggers
Examples of using Strength
Show more
Your inner strength should be even stronger
That can only be achieved through strength
We ask for strength to surpass all understanding
