Examples of 'bevel scale' in a sentence
Meaning of "bevel scale"
bevel scale: A scale or gauge that is used to measure or set the angle of a bevel, typically found in tools or instruments that require precise angular adjustments
How to use "bevel scale" in a sentence
Basic
Advanced
bevel scale
To use the bevel scale do the following.
Indicator for left bevel scale.
Use the bevel scale and the pointer as a guide.
Bevel lock knob bevel scale.
Use the bevel scale on the support as a rough gauge and set the table.
Tilt table to desired angle by reading bevel scale.
Check the bevel scale angle.
Tilt the motor to the required angle on the bevel scale u.
Loosen the lever on the bevel scale plate on the front base.
Rotate the blade tilting wheel and use the bevel scale.
Loosen the knob on the bevel scale plate on the front of the base.
Insert the screws through the table and bevel scale as shown.
Loosen the lever on the bevel scale plate on the front of the base.
This plate prevents wood resin from accumulating on the bevel scale during use.
Loosen the wing nut on the bevel scale plate on the front of the base.
See also
The bevel scale and indicator show you the degree the saw table is tilted.
Loosen the clamping screw on the bevel scale plate on the front of the base.
Rotate motor housing end of saw until you reach desired angle setting on bevel scale.
Loosen the clamp screw on the bevel scale plate on the front of the base.
Raise motor housing end of saw until you reach desired angle setting on bevel scale.
Remember, the bevel scale is a convenient guide but should not be relied upon for precision.
Tool and move the base plate to the desired angle using the bevel scale.
Note, The bevel scale should only be used as a reference.
Indicator For right bevel scale.
Check that the bevel scale ( u ) reads 0 when positioned for a vertical cut.
Align to desired angle on calibrated bevel scale 9.
The bevel scale is sized and positioned for easy reading - see Figure 48.
Make sure that the pointer on the arm indicates 0 on the bevel scale.
For Model XSS02 Loosen the lever on the bevel scale plate on the front base.
Tilt the cutting head to the desired angle, as shown on the bevel scale.
For Model BSS611 Loosen the lever on the bevel scale plate on the front base.
Loosen adjustment screw and adjust pointer to indicate 0 degrees on the bevel scale.
Attaching the bevel scale fig . Q.
Make sure that the pointer on the arm points to 0 on the bevel scale.
The bevel scale has preset positions at 0 and 45.
Align it to the desired angle on calibrated bevel scale 23.
In addition, a triangle indicator is provided on the bevel scale at 33.9 for cutting crown molding.
Adjust bevel angle ( Fig . 8 ) using bevel adjustment knob and bevel scale.
It locks the motor at any desired angle on the bevel scale Fig . 33.
Engage footplate into the 90 detent on the bevel scale.
Tilt the sawhead to the required angle on the bevel scale 69.
Move pointer ( H ) to zero mark on the bevel scale J.
The angle can be read on the bevel scale 12.
You'll also be interested in:
Examples of using Scale
Show more
Too much lime scale in the appliance
If scale becomes difficult to remove with brush
But we must now scale up our actions
Examples of using Bevel
Show more
The bevel guide has been factory adjusted
This is a combination of bevel crosscutting and mitering
Cuts bevel without tilting the torch
