Examples of 'bevel stop' in a sentence
Meaning of "bevel stop"
bevel stop: a phrase used in woodworking or construction, it refers to a device or mechanism that can be adjusted to set and limit the angle or bevel of a cutting tool or saw blade
How to use "bevel stop" in a sentence
Basic
Advanced
bevel stop
Bevel stop and pointer adjustment.
Tical to horizontal until the bevel stop locks in.
Each bevel stop pin has two positions.
Move the arm to the left until it stops on the left bevel stop screw.
Release the bevel stop pin and allow it to spring outward.
Push the head of the saw to the right until it contacts the 0 bevel stop.
Turn the bevel stop cam until it firmly contacts the.
This is designed to regain the preset bevel stop at the important 0 position.
The bevel stop overrides are held secure with their attachment screw to prevent inadvertent movement.
Loosen the bevel lock knob and ensure the arm is firmly against the 0 bevel stop.
It is desirable to provide a bevel stop mechanism to easily locate commonly used bevel angles.
To move past 0º to the right, pull the bevel stop knob.
Adjust the left side bevel stop screw upwards until it firmly touches the bevel stop.
To move past 0 to the right, disengage the bevel stop pin.
Loosen the 0 bevel stop mounting screw and push the stop against the pin.
See also
Loosen the bevel lock knob and pull the 0 bevel stop to override the 0 bevel stop.
The bevel stop overrides ( N ) are held secure with their attachment screw to prevent inadvertent movement.
To move past 0 to the right, press the bevel stop override.
Adjusting the bevel stop to 45 left or right NOTE.
Pivot to horizontal Press and hold the bevel stop 13.
Move the bevel stop cam ( RR ) until it firmly contacts the trunnion casting.
If you can not get to 0 bevel, the bevel stop may be in your way.
Turn the bevel stop cam ( 38 ) until it fi rmly contacts the bearing block.
Pivot to vertical Press and hold the bevel stop 13.
To reset the 0 bevel stop, re-engage the bevel stop pin.
Unlock the bevel lock lever ( J ) and loosen the bevel stop screw QQ.
Adjust the bevel stop ( See Step d ) so you may achieve 0 bevel.
In the middle position a 0 and 45 bevel stop is provided.
Loosen the bevel stop screw Figure 19.
Miter saw 10 is preferably provided with a bevel stop mechanism 50.
Adjusting the bevel stop to 45 left NOTE.
In addition, miter saw 10 is preferably provided with a bevel stop mechanism 30.
Make sure the override knob ( 27 ) is located in the bevel stop position.
While the drill bit is in the notches ( 61 ), turn the right bevel stop screw.
You'll also be interested in:
Examples of using Bevel
Show more
The bevel guide has been factory adjusted
This is a combination of bevel crosscutting and mitering
Cuts bevel without tilting the torch
Examples of using Stop
Show more
They would not stop killing sharks
Next stop menswear and sporting goods
That is not gonna stop me from trying
