Examples of 'bevel lock lever' in a sentence
Meaning of "bevel lock lever"
A bevel lock lever is a mechanism that allows you to securely lock the bevel angle of a tool such as a saw or miter saw in place, ensuring accuracy and safety during use
How to use "bevel lock lever" in a sentence
Basic
Advanced
bevel lock lever
Pull up the bevel lock lever to loosen.
This is found just behind the bevel lock lever.
Pull up the bevel lock lever to release tension.
Bevel angle is not securely held when bevel lock lever is pushed.
Turn the bevel lock lever to the right.
Tighten the miter lock knob and the bevel lock lever.
Tighten the bevel lock lever by pushing it down.
Bevel angle is not securely held when bevel lock lever is locked.
The bevel lock lever tension has been set at the factory.
Securely lock the bevel lock lever.
Push the bevel lock lever back to secure the base.
Adjust the bevel setting to zero and lock the bevel lock lever.
Release the bevel lock lever until the base can be.
Using the combination square and lock the bevel lock lever Fig . 19.
Push down the bevel lock lever to lock the angle position.
See also
Check locking power, Tilt the saw to about 30 and push down on bevel lock lever.
Lift bevel lock lever above table height with left hand.
Adjust the bevel angle using the bevel lock lever ( 12 ) until the blade.
The bevel lock lever must be attached before operating the tool.
Adjusting Tension ( see steps 1 and 3 above ) Pull up and push down the bevel lock lever.
Tighten the bevel lock lever when the desired angle has.
The bevel lock lever ( J ) may need adjustment to maintain lock force.
Push down the bevel lock lever to lock at the desired bevel angle.
Pull the bevel lock lever upward until the motor housing moves freely.
Ensure the bevel lock lever is in its unlocked, or up, position.
Increase bevel lock lever force by adjusting tension nut see page 25.
Loosen the bevel lock lever ( J ) and return the blade to 0 and lock.
Unlock the bevel lock lever ( J ) and loosen the bevel stop screw QQ.
Loosen the bevel lock lever ( J ), turn and move the blade height / bevel adjustment wheel I.
Unlock the bevel lock lever ( 12 ) by pushing it up and to the right.
Unlock the bevel lock lever ( J ), push in and turn blade height / bevel adjustment wheel ( I ) to.
You'll also be interested in:
Examples of using Bevel
Show more
The bevel guide has been factory adjusted
This is a combination of bevel crosscutting and mitering
Cuts bevel without tilting the torch
Examples of using Lever
Show more
Do not lift lever during brewing cycles
Lever can be adjusted to a different lever angle by
Open the lock lever to unlock footplate
Examples of using Lock
Show more
Get this lock off the gate
Lock bowl onto base by turning clockwise
Document digital lock concerns and complaints
