Examples of 'blade clamp' in a sentence
Meaning of "blade clamp"
This phrase refers to a device or mechanism used to secure or hold a blade in place, often in tools or equipment such as saws or knives. It is designed to ensure the stability and safety of the blade during use
How to use "blade clamp" in a sentence
Basic
Advanced
blade clamp
Close blade clamp release lever down.
Insert blade into the blade clamp.
Close blade clamp by pushing lever down.
Loosen the top thumbscrew blade clamp.
Rotate blade clamp collar to release position.
Be sure the spindle and blade clamp areas are.
Push blade clamp release lever down.
Securely tighten the upper blade clamp screw.
Open blade clamp release lever to its.
Insert blade shank fully into blade clamp collar.
Orient the blade clamp so that the proper.
Push the saw blade into the blade clamp.
Insert blade in blade clamp and tighten.
Blade clamp release lever figure f.
Release the blade clamp to secure.
See also
Your saw may or may not be equipped with a horizontal blade clamp.
Open up blade clamp release lever.
Loosen both the upper and lower blade clamp screws.
Open blade clamp by pulling lever up.
Make sure the spindle and blade clamp areas are clean.
Turn the blade clamp locking sleeve in a counter.
Insert saw blade between blade clamp and saw bar.
The blade clamp should also be kept clean.
Assemble the outer blade clamp onto the spindle.
The blade clamp lever rotates and the saw blade is fixed.
The operation of the jigsaw blade clamp will now be described.
Lift blade clamp lever located on side of saw.
Insert the saw blade into the blade clamp as shown.
Pull the blade clamp out until it stops.
The use of external tools may cause damage to this blade clamp.
Keep the blade clamp clean.
Insert the saw blade shank fully into the blade clamp.
Tighten the blade clamp screw back into place.
Then slide the cutting carriage aside to expose the blade clamp screw.
Rotate blade clamp collar to lock blade into position.
Push the saw blade into the blade clamp as far as it will go.
Open blade clamp release lever to its full open.
Insert the saw blade into the blade clamp as far as it will go.
Release blade clamp collar to lock blade into position.
Insert blade into the open blade clamp from the front.
Rotate the blade clamp counterclockwise and hold to open.
Insert the blade into the bottom blade clamp and securely tighten.
Twist open blade clamp collar to its full open position.
Keep hands from between the gear housing and saw blade clamp plunger.
Periodically lubricate blade clamp sleeve with a dry lubricant.
The blade clamp will rotate to its fixed position to secure the blade.
Slide the blade into the blade clamp in the correct orientation.
The blade clamp sleeve rotates and fixes the saw blade.
Insert pocket cutting blade in blade clamp and tighten blade clamp securely.
Turn the blade clamp locking sleeve in a counterclockwise direction and hold it in this position.
