Examples of 'cable cross-section' in a sentence
Meaning of "cable cross-section"
cable cross-section: This term pertains to the area or dimensions of the interior of a cable, specifically the cross-sectional shape or size of the conductive material within. It is relevant in the field of electrical engineering and telecommunications for determining the capacity and efficiency of conducting electrical signals
How to use "cable cross-section" in a sentence
Basic
Advanced
cable cross-section
Cable insulation material or cable cross-section.
Calculation of cable cross-section for power and current: formulas and examplesInstallation Of Wiring.
Only use approved extension cables with adequate cable cross-section.
Altivar reference Cable cross-section recommended by.
Guarantee correct power supply, check the cable cross-section.
The cable cross-section for battery configurations must be at least 6mm2.
The following causes are possible, The motor cable cross-section is not sufficient.
The minimum permissible cable cross-section of the 2-wire BUS connection arises from the cable length.
Preferably a 60 Ampere main fuse for this amplifier with an appropriate power cable cross-section.
The recommended minimum power cable cross-section of the main power supply cable is 20mm2.
For cables over 50 m long, it is advisable to increase the cable cross-section.
We recommend a cable cross-section of not less than 6 mm2.
Fig . 3 shows a superconducting cable cross-section.
For cable cross-section in mm ².
Battery cables, minimum cable cross-section.
See also
The cable cross-section for battery link-ups must be at least 6mm2.
For a cable length of up to 7 m a cable cross-section of 4 mm2 as a minimum is required.
A cable cross-section of 12mm2 must be used to connect the battery with the amplifier.
Only use extension cables or cable drums with a cable cross-section of 1.5 mm ².
The minimum power cable cross-section for this SPECTRON amplifier is 10mm2.
For the electrical connections especially for the protective conductor use a cable cross-section from minimum 0,75 mm2.
File, Submarine cable cross-section 3D plain . svg right thumb 300px A cross section of a modern submarine communications cable.
Only use extension or cable drums with a cable cross-section of at least 1.5 mm2.
You'll also be interested in:
Examples of using Cross-section
Show more
Gradual changes in the cross-section are permissible
A cross-section of the companies is profiled below
They were a representative cross-section of the average
Examples of using Cable
Show more
Secure the coaxial cable to the ceiling
A cable tie is provided with the appliance
Use plenum rated cable where it is required
