Examples of 'cable cover' in a sentence
Meaning of "cable cover"
cable cover: This phrase refers to a protective or decorative covering that is used to conceal or organize cables, wires, or cords. It is commonly used in office spaces, homes, or entertainment setups to keep cables neat, prevent tripping hazards, and improve the overall aesthetics of the area
How to use "cable cover" in a sentence
Basic
Advanced
cable cover
Cable management cover rear cable cover.
Tighten the cable cover screws.
Do not put bundled cables in the cable cover.
Attach the cable cover to the mounting plate.
Fire and water resistant cable cover.
Push up the cable cover slightly and rotate it to release.
They are attached to the cable cover.
Replace the cable cover and tighten the screws.
Do not force excessive pressure to the cable cover.
Keep the removed cable cover for future use.
Be sure to tighten the screws after attaching the cable cover.
A unique cable cover to help organize cables more easily.
Tighten rear feet to fix cable cover in place.
Remove the cable cover which is secured with cable ties.
Open the charger cable cover.
See also
Breakage of the cable cover or defects in the bead or terminal connections.
Do not place the power cord in a cable feedthrough or cable cover.
Install the cable cover and tighten the cable cover screws.
Attach the terminal cover and cable cover to the display.
A wire cable cover is mountable onto the housing and fastened portions of the wire cable.
The monitor stand includes a cable cover secured via a lock slot.
The cable cover is secured to the Visualizer by a rope to prevent it dropping down.
They burn the plastic cable cover to obtain the metal inside.
Also because of the pump I can not use the power cable cover.
Optional cable cover allows enhanced security of peripherals through Kensington lock slot.
Be careful not to get cables caught in between the cable cover and the projector.
Keep the EBM cable cover for future use.
E Remove the console cable cover.
The Small Form Factor cable cover provides cable management for constrained spaces.
Remove the SD Card Remove the outer shell and the cable cover of the camera.
Attaching the cable cover / terminal cover.
And then get rid of the Wi-Fi antenna cable cover.
Remove torch cable cover by removing three screws see figure 1.
Keep cables close together by twisting or taping them, or using a cable cover.
Note, cable cover is not shown in the drawings to improve readability.
Connect all cables to the projector, and then replace the cable cover.
Re-attach the cable cover and the outer shell of the camera.
After you connect the cables, attach the cable cover to the mounting plate.
Be sure to remove the cable cover / terminal cover before connecting or disconnecting cables.
Remove the top hole IntesisHome cable cover see Figure 1.
A cable cover is detachably attached on the ring main unit, for protecting each of circuits.
Choose between 4 different cable cover plates in silver for your unnu furniture.
Why do you use automatic fuses? - They are attached to the cable cover.
Loosen the cable cover screws ; detach the cable cover from the bottom cover.
Pieces of screws 1 piece of long cable cover 1 piece of short cable cover.
Loosen the cable cover screws until the Phillips screwdriver goes into a freewheeling condition 1 1.
A single Kensington lock (sold separately) can secure chassis and cable cover.
Removing the cable cover / terminal cover from the TV.
Famous brand accessoriess, High quality accessories ; Cable cover.
Such a cable cover bundles the turns of the yarn 106 into one compact bundle.
You'll also be interested in:
Examples of using Cover
Show more
Remove the battery cover by sliding it downward
Cover and keep warm up to one hour
Unscrew the bulb cover by turning anticlockwise
Examples of using Cable
Show more
Secure the coaxial cable to the ceiling
A cable tie is provided with the appliance
Use plenum rated cable where it is required
