Examples of 'cap nut' in a sentence
Meaning of "cap nut"
cap nut: A cap nut is a type of fastener that is used to secure objects together by screwing onto a threaded bolt or rod. It has a domed top, which provides an aesthetically pleasing finish and also protects the threads from damage or dirt
Show more definitions
- A closed nut having a dome-like cap over the back, protruding part of the engaged screw or bolt.
How to use "cap nut" in a sentence
Basic
Advanced
cap nut
On the inlet side with cap nut.
Place one cap nut on end of each axle.
Place one wheel on axle and slide down to cap nut.
Install cap nut on one side of shaft rod.
Propeller cap nut.
Place cap nut on end of axle.
Slide remaining wheel onto axle and hammer on second cap nut.
Fit a cap nut on the end of the steering column.
It is therefore not essential for the cap nut to be particularly firmly tightened.
Fit a cap nut onto the end of the steering column.
Said axial displacement of the mixer is achieved by turning the cap nut.
It is noted that the cap nut acts as a counter part.
Remove the gas pressure reducer from the cylinder unscrewing its cap nut.
Used together with cap nut to be mounted on a regulator or a welding handle.
The present invention exhibits quite a specific advantage when said nut is a cap nut.
See also
Remove plastic dust cover from cap nut on top of appliance pressure regulator.
Slide remaining wheel onto axle and hammer on second cap nut figure 4.
Loosen the fluted metal cap nut on the soldering iron and remove the holder.
Connect all mains units to the devices, only tightening the cap nut manually.
Remove the cap nut and flat washer from the front side of the belt cover.
When dismantling, first unlock the actuator and valve spindles, then loosen the cap nut.
The rotational torque of the cap nut 5 is reduced further thereby.
Place a cap nut under the fan blade, then tighten the screw into the cup nut.
Place axle upright on a hard surface and hammer on one cap nut Figure 4.
Figure 3 is side sectional view of a cap nut of the spring assembly of figure 1 ;.
At its opposite end, the sleeve 4 is externally threaded to receive the cap nut 6.
After the cable C has been inserted, the cap nut 6 is screwed on to the sleeve 4.
You then have, for example, the possibility of replacing the nut by a cap nut.
Repeat this procedure to fasten another 1.1 cm cap nut to the other front axle.
A second cap nut 17 is provided to assemble the sealing system 10.
Figure 4 is a side view with partial cross-section showing a cap nut and the stop ring ;.
Brass fitting cap nut Images & Photos.
Place axle upright on a hard surface and hammer on ( 1 ) cap nut.
Unscrew the air cap nut pos . 1.
A cap nut is screwed onto the screwthread of the fitting 259 and encloses a compression packing 261.
Check hose connection to on / off tap and retighten cap nut if required Fig . 3.
The nut 27 is of cap nut type and is fixed to core stiffener 25.
Product Type: cap nut.
Unscrew the knurled air cap nut in ( pos . 1 ) from the front part.
Place back plate ( J ) over mounting nipple ( E ) and secure into place with cap nut K.
The joint main body 13 and the cap nut 5 are composed of stainless steel, etc.
