Examples of 'cap part' in a sentence
Meaning of "cap part"
cap part: The term 'cap part' typically refers to a specific section or component of an object that can be covered or closed with a cap. It is commonly used in manufacturing or assembly processes where different parts need to be capped for protection or sealing purposes
How to use "cap part" in a sentence
Basic
Advanced
cap part
On replacement cap part one and two are complete.
The data card further includes a connecting part and a cap part.
The cap part is capable of covering the plug.
One ATA removal on replacement cap part one and two are complete.
The cap part can cover the plug.
It is understood that the guide slot can be provided outside the cap part 3.
The cap part can slide along the connecting part to cover the plug.
The data card includes a casing, a circuit board in the casing, a plug and a cap part.
The female portion 37 of the cap part has a similar groove in its internal surface.
This machine is divided into three parts, Washing barrel, Filling part and pressure cap part.
Figure 13 is a cut-away view showing the cap part of the toner container.
Please verify that the P-one ATA removal on replacement cap part.
Figure 19 is a diagram showing the cap part when the shutter member is taken out.
Polypropylene is a suitable material for the cap part 10.
The cap part 3 can slide along the guide rod 40 to cover a plug 2.
See also
The treatment tunnel 1 is made up of a base part 4 and a cap part 5.
When the cap part is returned the inner part 25 is screwed back onto the body 20.
In this embodiment, the antenna is provided on the connecting part 4 and the cap part 3.
This ensures a permanent connection of the cap part 31 to the sleeve part 33.
The inserting portion 51 is detachably inserted into the coupling portion 31 of the cap part 30.
The valve cylinder 18 and the cap part 60 are clamped with a ferrule joint ( not illustrated ).
Please verify that the P1 ATA removal on replacement cap part 1 and 2 are complete.
Therefore, the cap part 3 can slide along the guide rod 40 to cover the plug 2.
Please verify that the P-one ATA removal… 0n replacement cap part one and two are complete.
Positioning of the cap part 34Y in the cap receiving part 73 is performed.
The sealing assembly 20 may be safely retained by the lower cap part 12.
Shows a three-dimensional view of a cap part of a liquid dispenser, Fig . 5.
The container main part 33Y is rotatably fitted to the cap part 34Y.
Fig . 12 is a longitudinal sectional view of a back cap part of the apparatus shown in Fig . 3 ;.
When the valve disc 30 elevates, the air inside the cap part 60 is compressed.
