Examples of 'carriage bolts' in a sentence
Meaning of "carriage bolts"
carriage bolts: This phrase refers to a type of bolt with a smooth, dome-shaped head and a square neck that resists turning when the nut is tightened. Carriage bolts are commonly used in woodworking and other applications where a smooth finish is desired on the surface being bolted
Show more definitions
- plural of carriage bolt
How to use "carriage bolts" in a sentence
Basic
Advanced
carriage bolts
The main products of carriage bolts including.
The carriage bolts are installed from the bottom up.
Remove wing nuts and carriage bolts from handle.
Carriage bolts are not seated properly.
Reattach the wheels with carriage bolts at another hole.
Insert carriage bolts through holes from outside of unit.
Reassemble new skid shoes with the four carriage bolts.
Make sure all carriage bolts in flange are tight.
Adjust the height of the handle and make sure the carriage bolts are seated properly.
Carriage bolts must be seated properly into the handle.
Attach bracket to frame using carriage bolts and acorn nuts then tighten.
Feed carriage bolts through the other bracket and the base of.
The legs can be secured with carriage bolts fastened by nuts and washers.
The carriage bolts on the two end fl anges will have to be loosened.
Secure into position with wing nuts and carriage bolts removed earlier.
See also
Remove the carriage bolts and related hardware from the.
Attach discharge baffle D to the under side of the deck with carriage bolts.
Remove the carriage bolts and hex nuts which attach it to.
Then I marked and drilled the pilot holes for the carriage bolts.
Ss carriage bolts.
Remove the lower two plastic knobs, cupped washers and carriage bolts from.
Reinstall knobs and carriage bolts to lower handle or handle brackets for.
Loosely thread the other 2-pronged knobs onto the carriage bolts.
Sure that the carriage bolts are seated properly into the handle insulators.
Fully tighten nuts on M8 carriage bolts.
Insert the carriage bolts from the opposite side of the end sections.
Make sure the shoulders of the carriage bolts ( D ) are in the slots.
Carriage bolts on one side of vehicle and install side plate over carriage bolts.
The spacer will hold the carriage bolts in place as you add the saw.
Feed carriage bolts through the other bracket and the base of the saw as before.
Handle not in position Carriage bolts not seated in the handle.
Add carriage bolts from the inside and secure each with a lock washer and nut.
Fully Tighten the hex carriage bolts and hex nuts.
Remove the carriage bolts and hex nuts which attach it to the snow thrower housing.
Product name, Carriage bolts.
Insert carriage bolts and install the flat washers and hex nuts, tighten securely.
Just like other bolts, the carriage bolts can be of various types.
Add carriage bolts from the inside and secure each with a self-locking nut.
Unfold cross braces ( 5 ) and attach to carriage bolts at bottom corners of front bagger frame.
Insert carriage bolts ( G ) into the paired square slots from within both legs supports.
Secure bottle brackets with carriage bolts ( E ) and plastic knobs F.
Insert carriage bolts provided to hold handle in place Figure 2.
Handle hardware, including 4 carriage bolts and 4 flange nuts.
Insert the carriage bolts provided to hold the handle in place Figure 1.
Remove the two ( 2 ) handle knobs and carriage bolts.
Make certain the carriage bolts are seated securely into one of the two positions provided.
Developed beginning in the 1850s, it was one of the nation 's largest sources of carriage bolts.
Thread through the carriage bolts from underneath and secure with the locking nuts U.
Assemble the stand as shown in Fig . 4A, using 16 carriage bolts and hex lock nuts.
Would those carriage bolts be for you or are you taking ' em to your leader?
You'll also be interested in:
Examples of using Carriage
Show more
Also clean the carriage encoder strip
Carriage of receptacles for hot air balloons
Lock motorhead carriage in its home position
Examples of using Bolts
Show more
Heads of bolts go on the inside of the cart
Fasten with the previously removed bolts
Push bolts into holes on back of handle
