Examples of 'chain cover' in a sentence
Meaning of "chain cover"
chain cover: This phrase could refer to a protective covering or guard used to shield a chain from external elements or damage. It may be used in the context of machinery, bicycles, or industrial equipment
How to use "chain cover" in a sentence
Basic
Advanced
chain cover
Cleaning the inside of the chain cover.
Unscrew the chain cover under the vehicle.
Loosen a nut and remove the chain cover.
Rotate the chain cover lock knob counterclock.
I do believe it is on the bottom of the timing chain cover.
Slightly loosen the chain cover lock knob.
Fit the chain cover back on and tighten the nuts by hand.
Clean the inside of the chain cover with a brush.
Remove chain cover and bar and chain.
The brake band is at the back of the chain cover.
Rotate the chain cover lock knob clockwise to secure.
Loosen the nuts and remove the chain cover.
Always use the chain cover when transporting the chain.
Do not start the chain saw with the chain cover.
Fit the chain cover and the relative nut without tightening its.
See also
This is the back side of the old timing chain cover.
Make sure the chain cover lock knob is tight to the chain cover.
Never start up the pole pruner without the chain cover fitted.
Fit the chain cover and the relative nuts without tightening them.
Do not start the chain saw with the chain cover being installed on it.
When replacing the chain do not completely remove the chain cover.
You can not remove the chain cover without releasing the chain brake.
Hold the tip of the guide bar up and tighten the chain cover lock knob.
Mount the chain cover to the power unit and fasten the nuts to finger tightness.
Lift the tip of the guide bar up and retighten the chain cover lock knob.
Fit the chain cover to the power unit and fasten the nuts to finger tightness.
Remove any chips and sawdust from the tool after removing the chain cover.
CHain cover lock knob cHain cover lock knob cHain tenSioning knob cHain.
When storing saw, use a scabbard chain cover.
Assemble the chain cover B and thread the nuts A without tightening them.
If necessary, readjust with the chain cover loose.
Always close the chain cover after installing, removing or adjusting the cutter chain.
To install the cutter chain, open the chain cover.
The IKIA Bicycle Chain cover have good quality . It have good weldability, abrasion resistance.
When transporting in a vehicle or storage, cover chain with chain cover.
Iv Would the international guarantee chain cover national liabilities?
When not in use for cutting operations, it is imperative to fit the chain cover.
Loosen and remove the chain cover knob 9.
A closer view of the silicone gasket material ( arrow ) on the original timing chain cover.
The chain cover 91 may be not painted with the same color as a whole.
When transporting or storing the tool, always fit the chain cover on it.
Loosen the chain cover lock knob slightly and turn the chain tensioning knob 1/4 turn counterclockwise.
Open the handles and pull back the top chain cover jaw 1.
Refill the chain cover with approximately 800 grams of.
Keep holding the guide bar lightly, and tighten the chain cover after adjusting the.
Fit the chain cover knob ( 9 ) and tighten it finger tight.
Per my advice, they voted to publish it only on the Daisy Chain cover.
Timing chain cover 1.
Position, Front of the chain cover.
Chain cover - Mepu´s spare part store.
You'll also be interested in:
Examples of using Cover
Show more
Remove the battery cover by sliding it downward
Cover and keep warm up to one hour
Unscrew the bulb cover by turning anticlockwise
Examples of using Chain
Show more
I had the chain around its neck
Chain of command is very important in our thing
Direction of the chain movement and teeth
