Examples of 'chamber cover' in a sentence
Meaning of "chamber cover"
Chamber cover refers to the protective lid or casing that is used to cover chambers in various devices or equipment. It is designed to provide safety, prevent dust or debris from entering the chamber, or contain and control the contents within the chamber
How to use "chamber cover" in a sentence
Basic
Advanced
chamber cover
The cartridge chamber cover does not open.
A manhole is usually provided in the chamber cover.
The reaction chamber cover was removed.
Insert the batteries as shown on the inside of the battery chamber cover.
Close the cartridge chamber cover until it clicks shut.
The ammonia cylinder pipe was removed from the reaction chamber cover.
The cartridge chamber cover locks automatically after loading.
The impeller can advantageously be arranged just below the pump chamber cover.
Only need to press down the chamber cover can finish vacuum zing.
The dust chamber cover can only be closed if a dust filter bag has been inserted.
Remove measuring cell from the measuring chamber cover and attach new measuring cell.
Battery chamber cover Insert a memory card and battery.
This was the heat-generating chamber cover.
Open the popcorn storage chamber cover and pour fresh popcorn kernels into the.
In order to change the battery, take off battery chamber cover.
See also
Mount the tiled inspection chamber cover using silicone or Poresta structural adhesive.
Loosen fastening screws ( 3 pieces ) of the measuring chamber cover.
Do not open the cartridge chamber cover until “ 0 ” starts blinking.
The chamber cover panel 56 provides the bottom panel for the chambers.
The above mechanism is realisably secured in place by the pressure chamber cover 24 and nut 26.
Fire chamber cover mm 5.
The sturdy 10-millimetre-thick fire chamber cover ensures durability.
This plenum chamber cover 1 is located between a rear edge 3 of a vehicle bonnet 4 and a windscreen 5.
Thereafter, the tissue chamber is exposed by sliding open the chamber cover ( i.e., cutting sheath ).
Open the dust chamber cover by unlocking it and then flipping it up Fig . 16.
A second orifice 24 is provided between the fluid chamber cover 22 and the second connecting member 5.
There is a chamber cover 37 in rear of the convection motor 35.
A second orifice 24 is formed between the fluid chamber cover 22 and the second connecting member 5.
Loosen the screws ( 1 ) on the metal plate, and take off the combustion chamber cover.
Assembling the testo 325-I - Place measuring chamber cover on the measuring chamber.
Loosen the screws ( 1 ) on the metal panel, and take off the combustion chamber cover.
Figure 6-1 - This is the carburetor with the air horn and float chamber cover removed.
You'll also be interested in:
Examples of using Cover
Show more
Remove the battery cover by sliding it downward
Cover and keep warm up to one hour
Unscrew the bulb cover by turning anticlockwise
Examples of using Chamber
Show more
But not chamber devoted to a hundred poisons
Drawings of combustion chamber and piston crown
In a chamber where it is necessary to wear a mask to survive
