Examples of 'needle clamp' in a sentence
Meaning of "needle clamp"
needle clamp: A device used for securing a needle, especially in sewing or medical procedures, to prevent it from sliding out
How to use "needle clamp" in a sentence
Basic
Advanced
needle clamp
Then tighten the needle clamp screw.
The needle clamp screw is too loose.
Insert new needle into needle clamp with.
Loosen needle clamp screw and remove.
Remove the needle from the needle clamp w.
Tighten the needle clamp screw firmly.
Needle clamp screw too loose.
Tighten the needle clamp screw securely.
Use a screwdriver to securely tighten the needle clamp screw.
Tighten the needle clamp setscrews securely.
Tilting down the needle clamp.
Loosen the needle clamp screw q by turning it counterclockwise.
Hold the needle and loosen the needle clamp screw.
Tighten the needle clamp fixing screw.
Push needle into clamp until it reaches stopper a and tighten needle clamp screw firmly.
See also
Then screw the needle clamp as tight as possible.
Needle clamp screw Needle clamp.
Tighten the needle clamp screw with the.
The arm of darning / embroidery foot should ride onto the shaft of the needle clamp screw.
Tighten the needle clamp screw firmly by turning it clockwise.
Do not turn the handwheel while the needle clamp is tilted up.
Loosen the needle clamp screw by turning it toward you.
Insert the new needle into the needle clamp with the.
Loosen the needle clamp screw by turning it counter clockwise.
When rethreading, remove the thread from the needle eye before tilting up the needle clamp.
Loosen needle clamp screw and take out needle.
Push needle O deep into the needle clamp hole until it will.
Loosen needle clamp screw by using the needle plate screw driver.
Release the button when the needle clamp is locked in position.
The needle clamp can be tilted up for easy needle replacement and threading.
Insert needles fully into needle clamp with flat side to the back.
Q Needle clamp screw w Needle clamp.
Grasp the tab and pull the needle clamp up while pushing the button.
The needle clamp can be tilted up for easy threading see page 30.
Insert a new needle into the needle clamp with the flat side to the rear.
Tighten the needle clamp screw firmly while supporting the holder in place.
Remove the needle from the clamp . q Needle clamp screw.
Tighten the needle clamp screw with the screw driver.
The lever ( a ) should be behind the needle clamp screw b.
Tighten the needle clamp screw firmly with the screw.
Needle is not all the way up into needle clamp see page 23.
Loosen the needle clamp screw with a screw driver and remove the needle.
Grasp the tab and push the needle clamp down while pushing the button.
Loosen the needle clamp screw and tighten again after inserting the new needle.
Insert the new needle into the needle clamp with the flat side toward the back.
Bring needle clamp 1 to the highest position.
Insert the new needle into the needle clamp with the flat side away from you.
Loosen needle clamp screw, remove the old needle.
Insert a new needle into the needle clamp with the flat side turning away from you.
Securely tighten the needle clamp screw, us ing the screwdriver furnished with the machine.
You'll also be interested in:
Examples of using Needle
Show more
Wait until the needle totally stops
This needle bearing must be lubricated regularly
It may deflect the needle causing it to break
Examples of using Clamp
Show more
Do not subject the clamp to running water
You clamp the top of your throat
Then tighten the clamp screw securely
