Examples of 'clevis' in a sentence
Meaning of "clevis"
Clevis (noun): A U-shaped metal fastener with holes at each end to receive a pin or bolt, typically used in mechanical applications to attach or suspend parts
Show more definitions
- A U-shaped coupling having holes at each end, through which a bolt is run; used especially to fit attachments to a tractor or other vehicle as it allows a degree of rotation about the bolt.
How to use "clevis" in a sentence
Basic
Advanced
clevis
Attach the clevis to the fl ap servo arm.
Slide a silicone retainer over the clevis.
Connect the clevis to check freedom of movement.
My only mission was to retrieve the clevis.
Attach the clevis to the carburetor arm.
Making a hole in each lug of the clevis.
Secure clevis pin with hairpin clip.
Slide the tubing on the clevis.
Attach the clevis to the servo arm.
Clevis slip hooks with latches.
Thread the nut and clevis on the pushrod.
The clevis in each embodiment is suitable for being dismantled.
Hairpin clip and clevis pin.
Connect the clevis to the fl ap control horn.
Insert a cotter pin into the clevis pin.
See also
Slide a clevis retainer on a metal clevis.
Shapes and dimensions of trailer or implement clevis couplings.
Slide a clevis retainer on the clevis.
Lower the hamper to rest in the hitch clevis.
Thread a nut and clevis on the elevator pushrod.
Each guide is pushed by a spring toward the clevis.
Thread the clevis back onto the pushrods.
Connect curved arm to trolley with remaining clevis pin.
Thread the clevis on the pushrod.
Clevis coupling on first semitrailer.
Touch the clevis to that light.
Clevis coupling systems including drawbeams and drawbar eyes.
The snap ring on the clevis pin failed.
Replace clevis pin and hairpin clip on inside of wheel.
Reposition wheel and replace clevis pin and hairpin.
Attach the clevis to the throttle arm of the carburetor.
Remove hairpin clip and clevis pin from wheel.
Slide a clevis retainer on the barrel portion of the clevis.
Cut a piece of tubing and slide it onto a metal clevis.
Connect the metal clevis to the aileron servo arm.
A clevis is particularly suited to transmitting forces connected with torque.
Connect the remaining clevis to the aileron control horn.
Clevis and tongue coupling.
Attach the opposite clevis to the elevator control horn.
Remove the hairpin clip from the clevis pin.
Connect the linkage clevis to the rudder servo arm.
The clevis head can be used with other fittings.
Tighten the jam nuts against the clevis base.
Refer to the clevis adjustment instructions to center the ailerons.
Slide the tubing over the barrel of the clevis.
Insert clevis pins and secure with hairpin clips.
The brake rod came completely free of the clevis.
Reinsert the clevis pin and attach the hairpin.
You can open the exit even without a clevis.
Each clevis includes first and second side walls.
