Examples of 'clevis pin' in a sentence
Meaning of "clevis pin"
A clevis pin is a type of fastener consisting of a cylindrical pin with a flat head and a hole through which a split pin or cotter pin is inserted to secure it
Show more definitions
- Part of clevis fastener that allows rotation of the connected parts about the axis of the pin. A clevis pin consists of a head, shank and hole. The hole passes through the shank at the opposite end of the pin from the head. A cotter pin or similar through the hole keeps the clevis pin in place.
How to use "clevis pin" in a sentence
Basic
Advanced
clevis pin
Secure clevis pin with hairpin clip.
Hairpin clip and clevis pin.
Replace clevis pin and hairpin clip on inside of wheel.
Insert a cotter pin into the clevis pin.
Reinsert the clevis pin and attach the hairpin.
Connect curved arm to trolley with remaining clevis pin.
Remove spring clip and clevis pin from jack stand.
Install clevis pin in appropriate hole and secure with retainer spring.
The snap ring on the clevis pin failed.
Remove the clevis pin from the wheel bracket and wheel.
Reposition wheel and replace clevis pin and hairpin.
Replace the clevis pin and the cotter pin after.
Remove the hairpin clip from the clevis pin.
The clevis pin must go through the holes in the motor coupler.
Remove hairpin clip and clevis pin from wheel.
See also
Remove the clevis pin from the rear height adjusting yoke.
A cotter pin is required to prevent the clevis pin from loosening.
Remove the clevis pin from the double tine and tine shaft.
Align the bracket holes and join with a clevis pin as shown.
Remove the clevis pin and hairpin clip to raise or lower depth stake.
Install the handles using the clevis pin and hairpin cotter.
Insert the clevis pin through the tine shield and depth stake assemblies.
Secure with the spring clip and clevis pin previously removed.
Align the clevis pin holes in the downrod with the holes in the motor coupler.
Repeat for opposite side installing clevis pin in the same adjustment hole.
Align the clevis pin holes in the downrod with the holes in the downrod support.
Remove the spring clip and clevis pin from the jack stand.
Reinsert the clevis pin through aligning holes in both the tongue and the base.
Position downrod support and align the clevis pin holes in both parts.
Clevis pin Cotter.
Pull on the hanger ball to make sure the clevis pin is properly installed.
Clevis pin with head, hole and without hole.
Then remove the hair and clevis pin that will be used on a later step.
Never use tow straps with end hooks or link two straps with a clevis pin.
Remove the spring pin and clevis pin from the end of the tongue.
Many door reinforcement kits provide for direct attachment of the clevis pin and door arm.
Clevis pin without head, with holes and without holes.
Secure the jack stand in position with the clevis pin and spring clip.
If pressure on the clevis pin persists, slightly raise or lower the header.
The hairpin clip must be properly installed to prevent the clevis pin from working loose.
Slide clevis pin through holes in rail and bracket and secure with cotter pin . 3d.
Many vertical brace installations provide for direct attachment of the clevis pin and door arm.
Remove the clevis pin and bow-tie cotter pin from the control handle.
Pull on the Downrod to make sure the clevis pin is properly installed.
With door closed, connect curved arm to trolley with remaining clevis pin.
Straight arm attaches to carriage using clevis pin and cotter pin provided 2.
With door closed, connect straight door arm section to door bracket with a clevis pin 6.
Then, remove the preassembled hair and clevis pin and save for later use.
Install the clevis pin and secure with the hairpin clip Figure 3.
To do this, disconnect the hairpin from the clevis pin.
You'll also be interested in:
Examples of using Pin
Show more
Pin absolute pressure at venturi inlet kPa
Stick the pin around the strut
Pin baste to secure them for sewing
Examples of using Clevis
Show more
Attach the clevis to the fl ap servo arm
Slide a silicone retainer over the clevis
Connect the clevis to check freedom of movement
