Examples of 'clevises' in a sentence
Meaning of "clevises"
clevises (verb) - the third person singular form of the verb clevis, which means to fasten or connect two components using a clevis, a type of fastening device
Show more definitions
- plural of clevis
How to use "clevises" in a sentence
Basic
Advanced
clevises
Shackles or clevises hold the drag together.
Prepare two fi ttings with nuts and clevises.
Prepare all the clevises at this time.
And clevises directly affect aircraft response.
Prepare all four clevises at this time.
The clevises are in the form of point brackets.
The second attachment means advantageously comprise clevises.
Remove the clevises from the pushrods.
The wheels are mounted in respective clevises.
Attach the clevises to the servo arm.
Clevises made of stainless steel.
Tighten the nuts against the clevises to secure their locations.
Clevises are primarily used in applications involving the linear transmission of force.
Attach the two remaining clevises to the rudder servo arm.
Clevises of metal.
See also
Final adjustment is made by screwing the clevises in or out on the threaded couplers.
Connect the clevises to the outer holes in the servo output lever.
Slide the silicone tubing over the clevises to secure their position.
Connect the clevises on the pushrods to the holes in the horn lugs.
Small pieces of fuel tube make a safety device for the clevises.
Screw the clevises onto the rudder pushrods.
Adjust the distance between the pins in the clevises to the measurement shown.
Attach the clevises to the rudder control horns.
Connect both rudders with each other with the CRP rod and clevises.
Tighten the locknuts against the clevises when the settings are correct.
Screw the clevises onto the threaded end of the elevator and rudder pushrods.
High quality of the Clevises.
The links are mounted on the clevises by means of swivel joints in a known way.
Clevises are installed in the innermost holes of the control horns near the control surfaces.
Tighten the nuts against the clevises to prevent them from vibrating loose and changing position.
Clevises - for use with eyebolts optional.
In this example, only six arms of the casing are extended by clevises.
Now connect the clevises to the torque rod lugs and snap the clevises shut.
With the elevator servo centered, adjust the clevises so the elevator is centered.
Secure the clevises with a drop of cyano or thread-lock fluid.
Prepare the right and left cables, connecting the clevises to the rudder control horn.
Attach the clevises on the tail and rudder, insert into the middle hole.
By extending, they produce the rotation of suspension arms 20 in clevises 19.
Connect the clevises to the second hole ( from the outside ) of the aileron horns.
This attachment is such that the clevises 18 project beyond the lower skin 14.
The clevises can be secured on the pushrod using thread-lock fluid or a drop of cyano.
The slider 8 bears two clevises 10 disposed on either side of the axis of rod 1.
The clevises can be opened and disconnected quickly and easily using the clevis opener 97.
Thread 4-40 nuts and the clevises prepared in the previous step onto the threaded rod.
Clevises / Clevis joints.
Connect the M2.5 clevises to the output arms third hole.
Clevises 30 and 32 are herein illustrated orthogonal to each other.
Said clevises 5 l are extended by screws.
The clevises 25 and 26 for damping the vibrations are arranged on either side of the flange 21.
