Examples of 'connector cover' in a sentence
Meaning of "connector cover"
A connector cover is a protective device that is used to shield electrical connectors from damage or environmental factors, such as dust or moisture
How to use "connector cover" in a sentence
Basic
Advanced
connector cover
Reinstall test connector cover if used on vehicle.
How to open and close the connector cover.
The connector cover is also more robust.
When the extension connector cover is open.
The connector cover may be made of an elastic material.
Reattach the left connector cover.
Open the connector cover in the direction of the arrow.
Press to open the connector cover.
Remove the connector cover at the rear of the printer.
Remove screws from connector cover.
Remove the connector cover prior to plugging in your audio source.
Open the expans ion bus connector cover.
Keep the connector cover in place when accessories are not used.
Turn the thumbscrew clockwise to secure the connector cover to the radio.
Push the connector cover down to click onto the printer case.
See also
The fastening ring may be embedded in the connector cover at the opening.
Push the connector cover forward so that the projections at the bottom of the.
First remove the two small screws holding the antenna connector cover in place using a small.
Connector cover Connecting position of the polarity connectors.
Reinstall the connector cover of the copier.
Connector cover Pull the connector cover forward and then turn it.
Keep the battery connector cover for future use.
A groove on the screw head when removing the screws of the USB connector cover.
Always check that the connector cover is securely locked.
Connector cover One side to Antenna.
Remove the charging connector cover on the side of the laser.
Remove the screw of the USB connector cover.
Make sure that the connector cover of this unit is closed.
C PUSH button Opens the docking connector cover.
Remove the battery connector cover from the rear panel.
Finally, conceal the connection using the provided connector cover.
Remove the oxygen fill connector cover from the fill connector.
In all cases, the fastening ring is integrated with the connector cover.
Place the oxygen fill connector cover onto the fill connector.
See page 60 of these instructions for details about how to attach the connector cover.
Undo the nut on the connector cover and push it on to the cable.
Use a flat-blade screwdriver to gently pry out the drain hose connector cover.
These instructions apply if a connector cover is packed with your printer to protect your cables.
If additional EBMs are to be installed, remove the EBM battery connector cover.
Position the two hooks on the connector cover so that they hook the printer.
Playing songs on an iPod 1 Open the USB connector cover.
Remove the orange colored protective connector cover from the back of the switch module pull.
The HP TouchSmart PC includes a cable-management feature located behind the back connector cover.
The UPS has a battery connector cover that must be removed before installing the.
Remove the Code Scanner, and reinstall the test connector cover if used on vehicle.
Install the battery connector cover under the EBM cable to provide strain relief.
To use the connector, remove the connector cover as follows.
Rotate the battery connector cover on its side and position under the EBM cable.
While pressing both sides of the lock, slide the connector cover outward to release it.
Peripheral unit connector cover Covers a modular jack for connection of a cash drawer or other peripheral.
You'll also be interested in:
Examples of using Cover
Show more
Remove the battery cover by sliding it downward
Cover and keep warm up to one hour
Unscrew the bulb cover by turning anticlockwise
Examples of using Connector
Show more
Only the appropriate connector must be used
Purple connector for black whip antenna
Plug the charger connector into the
