Examples of 'curing temperature' in a sentence
Meaning of "curing temperature"
curing temperature - This phrase is used in the context of material science, particularly in the field of manufacturing and processing. It refers to the optimal temperature at which a material undergoes a curing or hardening process. Example: The resin must be exposed to a suitable curing temperature to achieve the desired strength and durability
How to use "curing temperature" in a sentence
Basic
Advanced
curing temperature
The curing temperature dries the membranes.
The difficulty lies in control of the curing temperature.
Curing temperature is dependent on the particular catalyst used.
The amount of yellowing increases as the curing temperature increases.
Generally a higher curing temperature also results in an increased hardness.
The molding die is preferably heated to a curing temperature in advance.
Film curing temperature.
Curing can be restarted by again reaching the curing temperature.
No specific curing temperature is mentioned and neither is any specific refractory clay.
Note that stearic acid melts at curing temperature as well as sulphur.
Therefore these materials are preferably applied at or close to the curing temperature.
The mixing is performed below the curing temperature of the curing agent.
Preferably the chain linking temperature corresponds to the gelling or curing temperature.
Conclusions from the tests are that curing temperature and time is important.
The curing temperature plays an important role for this type of coating systems.
See also
The final blend is pressed in a mould at the desired curing temperature.
The curing temperature should be lower than the degradation temperature of the binder.
Most powder coating formulations require a much higher curing temperature.
It suggests that increasing the curing temperature is the primary measure for improving strength.
The curing can be accelerated by slightly elevating the curing temperature.
It should be noted this curing temperature was lower than that needed for clear coatings.
The amount of catalyst used can be dependent on the curing temperature employed.
Curing temperature and time had little impact on the coatings appearance or surface energy change.
The seam is then heated further to the curing temperature of the foam.
Thus, the curing temperature or the vulcanization temperature thereof can be increased.
Concentration of catalyst is an important factor in reducing curing temperature and curing time.
The curing temperature may be a constant temperature, or may be increased / decreased stepwise.
The insulating member may be an insulating adhesive resin having a predetermined curing temperature.
The temperature used should be above the curing temperature of the cyanate ester resin.
In one embodiment the temperature of the matrix is increased continuously to the curing temperature.
The curing time is dependent upon the curing temperature although this time is not crucial.
Subsequently the obtained compacted component is optionally annealed to a temperature above the curing temperature.
Heating the applied coating to at least its curing temperature until complete curing.
The compositions of the present invention also contain components which volatilize at curing temperature.
They also reported a decrease in peak curing temperature of the reinforced PMMA.
The particles have a melting point that is above ambient temperature and below the curing temperature.
A lower curing temperature will usually lead to lower reflectivity, but increased transparency.
This temperature range can correspond to the low end of the curing temperature range.
Once the desired curing temperature is obtained, it is held for a predetermined amount of time.
These diamines provide the best physical properties with respect to curing temperature and storage stability.
In any case the curing temperature must be at a temperature below the fabric 's melting temperature.
As described above, there is no particular limitation on a curing temperature.
As will be appreciated, as the curing temperature increases, the curing time can decrease.
The temperature was at or above the manufacturer 's specified curing temperature.
Figure 6 shows a diagram illustrating the curing temperature and leaching for different formulations.
However, in industrial practice, it is very difficult to realize this condition of curing temperature.
Figure 4 shows a diagram illustrating the curing temperature and remaining product after redissolution.
By contrast, most powder coating formulations require a much higher curing temperature.
The carrier resin 92 has a curing temperature at which the material becomes cross linked and thermoset.
In autoclave molding, the materials are exposed to a curing temperature of the prepreg.
You'll also be interested in:
Examples of using Curing
Show more
Not the curing but the preventing
Doctors get rich just by curing cataracts
Follow curing directions found on the can
Examples of using Temperature
Show more
Manufacturer of the separate temperature measuring equipment
Actual temperature below low temperature value
Select the desired temperature with and
