Examples of 'deposition rate' in a sentence
Meaning of "deposition rate"
deposition rate - This phrase refers to the rate at which a material is deposited or accumulated on a surface through a specific process, such as vapor deposition or electroplating. It indicates the speed or amount of material that is added to the surface per unit of time, typically measured in units like nanometers per second or microns per hour
How to use "deposition rate" in a sentence
Basic
Advanced
deposition rate
The deposition rate generally increases with.
One of the decisive parameters is the deposition rate.
Deposition rate can be finely tuned.
This avoids undesirable deposition rate profile changes over time.
The deposition rate as a rate of change of heat transfer resistance is measured.
An additional factor in determining the structure of water ice is deposition rate.
The deposition rate is fast.
Measurements were calibrated using laser absorption and were corroborated by deposition rate.
High deposition rate.
Such a symmetric arrangement provides a high deposition rate during welding.
The deposition rate of pyrolytic carbon is activated by the temperature of the substrate.
This enables easy adjustment of the applied coating deposition rate.
Deposition rate is considerably slowed while retaining a maximum in the hottest portions.
Lyell tried to measure the sediment deposition rate using a water container.
Deposition rate is affected by the temperature at which the deposition is carried out.
See also
Final thickness was controlled together with deposition rate monitoring vÃa a quartz crystal.
The deposition rate of astaxanthin in the muscle of salmonides depends on several factors.
We first validated the daily nature of the otolith increment deposition rate.
The deposition rate must be sufficient for economically acceptable industrial production.
A good wetting also enables a high deposition rate and thus a high productivity.
The deposition rate was controlled by adjusting the temperature of the deposition crucible.
This flow rate is chosen as previously explained to obtain a maximum controllable deposition rate.
Deposition rate increased with increased temperature and decreased with decreased pressure.
The thickness of the layers and the deposition rate is checked using a quartz balance.
A deposition rate of the cathode layer is a little higher than that of the anode.
The extra argon ions created as a result of these collisions lead to a higher deposition rate.
The electrolytic deposition rate is then proportional to the amount of current that passes.
If the inventive electrolyte contains additionally ferrous ions the deposition rate of chromium is enhanced.
The wax deposition rate presented a good agreement with the results of commercial software olga.
The coating área is thus insufficiently utilized and the silica deposition rate drops.
Deposition rate is expressed as the ratio between the spray rate and spray spot square.
Increasing the concentration of hypophosphite increases both the magnetic coercivity and metal deposition rate.
First the deposition rate of different oxide mixtures under the same experimental conditions was studied.
One can recognize a similar nature of the substrate current and the coating deposition rate changes.
For all concentrations the deposition rate was strongly linearly correlated with the suspended sediment concentration.
By increasing the arc current the total ion current increases and the deposition rate increases.
The addition of DMA did not lead to a deposition rate inferior to that with triethanolamine.
Higher AE for rhodium indicates slower rhodium deposition rate.
Material A is added and the deposition rate of materials B is reduced.
In MVD the reagents concentrations control the deposition rate.
A good deposition rate and good penetration ;.
These data also show that the silver thickness and the deposition rate increases with agitation.
In addition, deposition rate and yield are low.
The processes were then developed and the PACVD deposition rate improved on.
The mean deposition rate of the plateau ;.
This decreased atomic F concentration can result in an increased deposition rate.
A deposition rate of about 8 microns per minute was typical.
Nevertheless, there is no advantage as regards deposition rate.
Otherwise, the deposition rate increases with reaction temperature.
And in this film formation, the deposition rate is low.
You'll also be interested in:
Examples of using Deposition
Show more
Informal local deposition industrial products waste
I am not going to mention any of that in the deposition
Tailings deposition and water management plans
Examples of using Rate
Show more
The mortality rate is certainly on the rise
Rate stations and assign audit points
Low literacy rate and school attendance
