Examples of 'diameter of the pipe' in a sentence
Meaning of "diameter of the pipe"
The diameter of the pipe refers to the measurement of the width of a cylindrical pipe or tube from one end to another, passing through its center. It is usually expressed in units of length, such as inches or millimeters. Knowing the diameter of a pipe is important in various engineering and construction applications to determine fluid flow, structural strength, or compatibility with fittings or connectors
How to use "diameter of the pipe" in a sentence
Basic
Advanced
diameter of the pipe
For the outer diameter of the pipe.
Diameter of the pipe for return.
There is no decrease in inner diameter of the pipe.
The internal diameter of the pipe used is as follows.
The choice of plane depends on the nominal diameter of the pipe.
The diameter of the pipe through which information passes.
Line size should indicate the outside diameter of the pipe or structure.
Diameter of the pipe or tube.
This can be calculated by the diameter of the pipe and the water level.
The diameter of the pipe or openings therein is not specified.
The flow is determined by the diameter of the pipe according to the table below.
The diameter of the pipe may be selected so as to favor plug flow.
Use the supplied tape measure to determine the outside diameter of the pipe.
Outside diameter of the pipe.
The diameter of the displacer is greater than the inside diameter of the pipe.
See also
The diameter of the pipe must not narrow towards the top.
The axis on the right represents the internal diameter of the pipe expressed in mm.
Can the diameter of the pipe be on the stake or flag?
On the outside each beam always exceeds the large diameter of the pipe.
The route and diameter of the pipe in particular, may be checked.
The pump loses efficiency depending on the length and diameter of the pipe connections.
Conversely, the diameter of the pipe can be reduced by reducing the hydraulic pressure.
The diameter of the circular opening may be greater than the diameter of the pipe.
Also, the diameter of the pipe fits.
Inside the pipe there is a piston that almost completely fills the diameter of the pipe.
D M denotes the mean diameter of the pipe and.
The diameter of the pipe to be used should be minimum 10 cm.
Diameter, according to the nominal diameter of the pipe.
The internal diameter of the pipe mouth is 101 mm.
Before you order, measure the outside diameter of the pipe.
The inner diameter of the pipe must be at least 100mm.
In practice, a distance of at least ten times the diameter of the pipe is sufficient.
Maximum diameter of the pipe, 4 in.
For a circular pipe, D is the internal diameter of the pipe.
A suitable diameter of the pipe is in the most cases correspondingly within 0.5 to 1.5 meters.
Size of the valve, diameter of the pipe.
The inner diameter of the pipe segment 11 is preferably equal to or less than 1000 millimeters.
In a preferred embodiment, the diameter of the pipe 9 is about 2 mm.
The diameter of the pipe can change along the length thereof, defining different cross sections ( 2, 3 ).
In other words, the diameter d is the inside diameter of the pipe 1.
This means that the internal diameter of the pipe in our example is 36 inches.
The diameter of the opening 13 preferably coincides with the diameter of the pipe 9.
The length usually required is 3.5 X the diameter of the pipe to be coupled.
More preferably the cross-sectional diameter of the pipe is 150mm.
Calculate the speed of flow at a point where the diameter of the pipe is 10.0 cm.
You'll also be interested in:
Examples of using Diameter
Show more
A change in wire diameter results in changed parameters
Diameter of and pressure in the fire mains
The incoming hole diameter on auxiliary terminal
Examples of using Pipe
Show more
Pressure transmission pipe in the combustion chamber
Pipe is the heaviest wave in the world
Two pieces of pipe and a bicycle chain
