Examples of 'diameter of the wire' in a sentence
Meaning of "diameter of the wire"
diameter of the wire - Refers to the distance across a wire passing through its center, typically used in engineering, construction, or manufacturing contexts to specify the thickness or gauge of wires
How to use "diameter of the wire" in a sentence
Basic
Advanced
diameter of the wire
Aperture is large in relation to the diameter of the wire.
In all cases the diameter of the wire will be referred to.
The mechanical drive adjusts automatically to the diameter of the wire.
The diameter of the wire affects the radius of the bend possible.
This operation ensures uniform diameter of the wire coil.
The diameter of the wire was controlled by changing the size of the seed.
The correct position for the diameter of the wire being used.
The diameter of the wire is preferably lower than 1 mm.
This thickness can be adapted to the outside diameter of the wire.
The initial diameter of the wire is De.
The quantity of wire that is deposited depends on the initial diameter of the wire.
Measured the diameter of the wire by means of a micrometer;.
In some embodiments the second pitch may be substantially equal to a diameter of the wire.
The diameter of the wire must be comparable to that of the thermocouple ( inertia ).
The quantity is determined by the diameter of the wire used on the rod.
See also
Likewise, the diameter of the wire and the angle of the groove can be varied.
Confirm the wire slot of the roller is suitable for the diameter of the wire.
The diameter of the wire is of the order of 20 um.
The clearance j may usefully be between one and five times the diameter of the wire.
The diameter of the wire can be of the order of 20 um.
These forces are higher, the greater the diameter of the wire.
D is the diameter of the wire in cm ;.
Preferably, the space is no greater than half a diameter of the wire.
The diameter of the wire after drawing, expressed in mm ;.
The winding pitch is thus equal to the outside diameter of the wire 6.
The diameter of the wire varies from 2 to 3 mm and is for example of 2 mm.
Further, the second pitch may be substantially equal to a diameter of the wire.
Advantageously, the diameter of the wire is approximately equal to 0.4 mm.
The substantially planar side 27 generally corresponds to the diameter of the wire.
Nominal diameter of the wire ( in mm ).
The gap of material between each rectilinear portion 34 depends on the diameter of the wire.
The diameter of the wire meets the specifications of the ISO 4782 standard.
Moreover, the slots have a radial depth that is a multiple of the diameter of the wire.
Where D = the diameter of the wire guide cylinders 4 ;.
Openings 13 are selected to be smaller than the diameter of the wire insulation.
The passages 18 are of slightly larger diameter than the diameter of the wire.
The groove 70 has a depth greater than the diameter of the wire of the spring 82 '.
We retained a gauge length of 200mm for the elongations, whatever the diameter of the wire.
Apparatus as claimed in claim 9 wherein the diameter of the wire is up to 2.80 mm.
Such cylinder has a diameter approximating the diameter of the wire 20.
The width of the slot 35 is smaller than the diameter of the wire.
This width is typically equal to one or two times the diameter of the wire 60.
Using an ocular micrometer, I was able to determine the diameter of the wire is 18 gauge.
TABLE 7 Mechanical properties The mid-direction diameter of the wire of.
The width of the slot 40 is greater than the diameter of the wire 20.
The opening 39 need only be larger than the diameter of the wire 38.
However, the open pad 25 should not be small compared to the diameter of the wire 16.
You'll also be interested in:
Examples of using Diameter
Show more
A change in wire diameter results in changed parameters
Diameter of and pressure in the fire mains
The incoming hole diameter on auxiliary terminal
Examples of using Wire
Show more
Steel wire liners can be coated or noncoated
Use a passage aid wire or previous cord
Cut wire liner at the right length
