Examples of 'dome cover' in a sentence
Meaning of "dome cover"
dome cover: Refers to a protective cover or enclosure in the shape of a dome, often used to protect or shield an object or area from various elements
How to use "dome cover" in a sentence
Basic
Advanced
dome cover
Assemble the dome cover by turning it clockwise.
Disassemble the camera by removing the dome cover.
The dome cover is the optical part.
How to replace the dome cover optional.
The dome cover is particularly susceptible to damage.
Clear transparent dome cover premounted.
Be careful not to scratch or damage the dome cover.
Smoked dome cover with gasket.
Condensation inside of the dome cover.
Fix the dome cover on the base by covering.
To do this remove the two screws in the dome cover.
Put the dome cover over the base.
Remove the protective film from the dome cover.
A smoked dome cover is available as an accessory.
The product is supplied with a clear dome cover premounted.
See also
Screw the dome cover and body together.
Securely anchor the camera when removing the dome cover.
Remove the dome cover before lens adjustment.
Tighten two screws from the sides of the dome cover.
Reassemble the dome cover on the camera assembly.
A dome closure has an end plate assembly and a dome cover.
Attach the dome cover and tighten the screws.
Care should be taken not to scratch the dome cover when wiping it.
A dirty dome cover or lens causes deterioration of picture quality.
Place the magnetic dome cover over the camera.
On the dome cover because this could decrease image quality.
Mount the product with the dome cover facing downward.
Take the dome cover out of the speed dome box.
This is caused by the shape of the dome cover and is not a malfunction.
Attach the dome cover to the camera as the direction shown below.
Loosen the dome ring screws and remove the dome cover.
Remove the steam dome cover to reach the control.
Make sure the rubber gasket is fitted correctly on the dome cover.
Do not clean a dome cover that looks clean to the eye.
Imaging focal depth can be adjusted freely by removing the dome cover.
Periodic cleaning of the dome cover may be required to maintain a clear image.
There are cover plates for the openings on both sides of the dome cover.
Always clean the dome cover with a soft cloth after installation.
Remove the metal ring and dome ring from the plastic dome cover.
Remove the vinyl film from the dome cover once installation is complete.
The dome cover can be fitted with the clear or the smoked plastic glass.
Remove protective vinyl sheet from the dome cover once installation is completed.
Attach the dome cover to the camera and fasten the two security screws.
Rotate the black shield inside the dome cover so it does not cover the lens.
Function switch located at the rear side of the camera within the dome cover.
Gently press down the dome cover with two hands on the side of it.
Insert coin to the side hole and remove the dome cover by twist coin.
Anything hitting the dome cover may damage the camera or cause leaks.
Press the power button to temporarily power the product when the dome cover is removed.
Screw off the dome cover from the dome body using the supplied.
