Examples of 'drain screw' in a sentence
Meaning of "drain screw"
drain screw: a screw or plug used to secure the drain outlet of a pipe or container, typically found in plumbing or mechanical systems
How to use "drain screw" in a sentence
Basic
Advanced
drain screw
The drain screw must be freely accessible.
Check flow by loosening the drain screw.
Remove oil drain screw and sealing washer.
Loosen the vapor separator drain screw.
Fix in the oil drain screw and tighten it.
Replace washers of the oil drain screw.
Turn the oil drain screw in again and tighten it.
Screw back in the petrol drain screw.
Check that the fuel drain screw is tightened securely.
Reinstall sealing washer and oil drain screw.
Turn out the oil drain screw at the front.
Drain the carburetor by loosening the drain screw.
Reinstall the carburetor drain screw and sediment cup.
Remove the drain screw of the carburetor float chamber and discharge fuel.
Install and tighten the drain screw securely.
See also
Loosen the drain screw on the carburettor and drain the remaining fuel.
Unscrew the engines oil drain screw and.
Close the drain screw again when all the.
Install the oil drain screw.
Unscrew the oil drain screw and drain the used oil entirely.
Tighten the oil drain screw.
The oil drain screw is situated on the front side of the reduction gears.
Turn off the fuel valve lever and loosen the drain screw.
Then close the drain screw again turn it clockwise.
The brass insert has a central thread for accommodating an oil drain screw.
Remove the plug and drain screw from the angle transmission.
Some MANKENBERG steam traps are equipped with a drain screw.
Loosen the drain screw a few turns and drain the unit completely.
Turn fuel valve lever to ON and then loosen the carburetor drain screw.
All models have a drain screw on the front allowing the fluid to be drained easily.
After draining, replace the carburettor drain screw.
Remove the oil drain screw and completely drain oil from the engine.
After draining is completed, tighten the carburetor drain screw.
Loosen the carburetor drain screw and drain the gasoline from the carburetor.
When thoroughly drained, retighten the drain screw securely.
Loosen the drain screw and drain the gasoline from the carburetor and fuel tank.
Drain until the fuel tank is empty, and then tighten the drain screw.
Remove the carburetor drain screw and drain the gasoline from the carburetor into a suitable container.
Remove the cover, drain fuel from the carburetor by loosening the drain screw.
Unscrew the air drain screw cock, and eliminate the air.
Blade and blower wheel need to be removed to reach the oil drain screw illustration 13.
Re-fit the drain screw with a packing ring after fuel tank emptying.
Position a suitable container under the carburetor drain screw to catch fuel ; loosen the screw.
At least one drain screw 8 which is produced in the form of an Archimedean screw.
After all the fuel has drained into the container, tighten the drain screw securely.
Fresh water tank / boiler drain screw Standard accessories E1 Complete Steam vacuuming hose with control handle.
To check, Turn off the fuel valve lever and loosen the drain screw.
Open the drain screw 2 to drain the fuel.
Turn the engine switch to the OFF position, and tighten the drain screw securely.
Locate the carburetor drain screw [ 2 ] in the access hole on the left rear side.
You'll also be interested in:
Examples of using Drain
Show more
Leave it to drain on the half moon insert
The washing machine does not drain or spin
There is a drain pump in the ice machine
Examples of using Screw
Show more
Tighten the screw through the clips
Screw the two sections of pole together
Remove the screw on the rear coupler
