Examples of 'duct covers' in a sentence
Meaning of "duct covers"
duct covers: This phrase refers to protective coverings or enclosures used to shield and secure ductwork, such as in HVAC systems. Duct covers help improve safety, efficiency, and aesthetics by enclosing and safeguarding ducts from external elements
How to use "duct covers" in a sentence
Basic
Advanced
duct covers
Slide duct covers over motor housing.
Separate the two decorative duct covers.
Install duct covers and utensil rods.
Remove the film from the duct covers.
Assemble the duct covers as shown.
Two people are required to install the duct covers.
Place telescopic duct covers on top of hood.
Remove the protective film from all duct covers.
Telescopic duct covers are provided to conceal.
For vented installations the slotted holes will be hidden down inside the lower duct covers.
Decorative duct covers are provided to conceal.
Place a duct cover clip on each side where the front and rear duct covers meet.
Place the decorative duct covers on top of the hood.
LED lamps already installed Lower and upper duct covers.
Slide telescopic duct covers onto the top of the blower unit.
See also
Only things I touched were the light switch and the air duct covers.
For taller ceilings duct covers can be joined together in any combination.
Install 1 screw on each side at the top and bottom of the assembled duct covers.
Assemble the upper duct covers together and install the duct.
For ducted installations, the slotted holes will be hidden down inside the lower duct covers.
Insert the duct covers and slide down the top duct cover.
Step 11 install duct covers cont.
Add or subtract duct covers as appropriate to accommodate ceiling height and recommended hood height.
Slip upper and lower telescopic duct covers onto top of blower and screw in place.
Attach lower duct covers using a plastic bracket at each corner 4 needed.
Upper and lower duct covers assembled - rear placement.
Assemble the upper duct covers together and install the duct covers around the support frame.
After completing installation of the duct covers for horizontal discharge, proceed toTCO-1 instructions.
Bottom duct covers will rest on top of the hood body . FIG . J, 3.
X3 mm screws Place lower duct covers using one plastic bracket at each side 4 needed.
Place lower duct covers using one plastic bracket at each vertex 4 needed.
Place lower duct covers using one plastic bracket at each side 4 needed.
Place upper duct covers sliding through until spring sounds “ click ”.
Slide upper duct covers into place until springs “ click . ”.
Assemble bottom duct covers together over top duct covers using ( 3 ) M3 x 5 screws on each side.
You'll also be interested in:
Examples of using Covers
Show more
This policy covers the following aspects
Covers only part of the universe of truckers
Remove screw covers on the left side of
Examples of using Duct
Show more
Change duct size gradually to minimize turbulence
Durable rotomolded duct rings and housing
Duct supports are recommended to support weight of cabinet
