Examples of 'duct cover' in a sentence
Meaning of "duct cover"
duct cover - A duct cover is a protective covering used for ductwork, which are pipes or channels that carry air, heating, ventilation, or other substances throughout a building. The cover helps to shield the ductwork and prevent damage or interference
How to use "duct cover" in a sentence
Basic
Advanced
duct cover
Set the lower duct cover in place.
The duct cover structure is supported by the hood.
Place one of the duct cover brackets against.
The duct cover includes a flow directing honeycomb.
Separate the supplied duct cover into pieces.
Upper duct cover attachment screw locations.
Place temporary screws to hold the duct cover up.
Fasten outer duct cover to plastic plate on.
Separate the supplied duct cover.
Install duct cover and utensil rods.
Install the lower duct cover.
The duct cover is completed by curing the assembly.
Install the upper duct cover.
Slide the duct cover up and secure the inner.
Reassemble the air deflector to the duct cover bracket.
See also
Duct cover bracket not required for recirculating operation.
Position the entire duct cover up onto the hood.
Cm minimum for installations with optional duct cover.
Position the duct cover over the mounted hood.
A screw hole is located on each side of the duct cover.
Center and attach duct cover mounting bracket to wall.
Installation of the duct cover.
Insert the duct cover assembly into the impressions.
Secure air diverter plate to wall below duct cover bracket.
Place one upper duct cover over the rear of.
Failure to do so could result in personal injury or damage to the duct cover.
Note that the duct cover and backsplash are sold separately.
Assemble the air deflector with the duct cover bracket.
Secure the lower duct cover to the range hood canopy using.
Remove the air deflector from the duct cover bracket.
Slide the lower duct cover up and above the stop screw.
This screw supports the load of the upper chimney duct cover.
Align the top edge of the duct cover bracket with.
The duct cover should be seated into the pocket on top of the hood.
Secure outward edge of the duct cover with two screws.
The duct cover may have a curved portion that corresponds to the tube.
This bracket will hold the duct cover in place at the top.
The duct cover of the present invention is operative for directing a fluid flow.
The vent hood is packed with the duct cover and support frames.
Insert the duct covers and slide down the top duct cover.
Attach a charcoal filter and the deflector on the duct cover support bracket.
Insert the complete duct cover at an angle and swivel toward the wall.
Locate and fasten bracket for upper telescopic duct cover onto the wall.
Insert the duct cover assembly into the impressions on the top of the hood.
Cm minimum for installations with optional duct cover or telescopic chimney kit.
A duct cover accessory may be required for your hood installation depending on ceiling height.
This outlet must be located in the duct cover area above the hood.
Angle the duct cover to slide the tabs under the ledge of the hood body.
Removing the packaging remove the carton carefully and take out the duct cover.
Slide the upper duct cover into the folded ends of the lower duct cover.
You'll also be interested in:
Examples of using Cover
Show more
Remove the battery cover by sliding it downward
Cover and keep warm up to one hour
Unscrew the bulb cover by turning anticlockwise
Examples of using Duct
Show more
Change duct size gradually to minimize turbulence
Durable rotomolded duct rings and housing
Duct supports are recommended to support weight of cabinet
