Examples of 'etching time' in a sentence
Meaning of "etching time"
etching time: This phrase is used to describe the process of carefully planning or carving out specific periods or moments for a particular activity or purpose
How to use "etching time" in a sentence
Basic
Advanced
etching time
The etching time depends on the thickness to be etched.
This partial etching is obtained by restricting the etching time.
The etching time t required may be optimized in this way.
Instead a gradual decrease in separation factor with etching time is observed.
Otherwise the etching time is shortened in order to limit the stripping.
The depth of the etching is adjusted by varying the length of etching time.
The etching time can ranger from a few seconds to a few minutes.
The etching depth and therefore etching time are determined by the fibre diameter.
The etching time will lie between several seconds and several hundreds of seconds.
A first procedure consists of checking the etching time after accurately calibrating the etching speed.
The output power at a given current increased with increasing PEC etching time.
This reduces the etching time as well as reducing stray etching in the other directions.
Thus, the tip would only disappear after a much longer etching time.
This optimises the etching time for the elastic structure and for the blind hole.
To etch layer 2 after layer 4, it is enough to increase the etching time.
See also
The advantage is that the HF vapour etching time before bonding is quicker.
The etching time is determined so as to stop etching on the buried oxide layer 3.
In order to etch, it will be necessary only to pre-adjust the etching time.
For this, the etching time by the wet solution is controlled.
The “ mirror-like ” surface before PEC etching becomes discolored as the etching time increases.
An etching time of about 2 minutes is required at ambient temperature and at ambient pressure.
Before each production, and the etching time is determined according to the micro-etching rate.
FIGS . 8A-8C present XRD patterns of steam etched carbon as a function of etching time.
The etching time is very short since it must not exceed 3 seconds.
A relationship between an etching time ( sec. ).
The etching time is thus reduced, resulting in easier control and better precision.
The etching time is within a range of from 10 minutes to 30 minutes.
The same etching time is obtained with 85 % dilute phosphoric acid.
The etching time may be between several seconds and several hundred seconds ( FIG . 5B ).
You'll also be interested in:
Examples of using Time
Show more
Spent a lot of time with the ladies
Time and tide wait for no man
A woman needs time to think things over
Examples of using Etching
Show more
Etching of plastic substrates prior to their metalization
I will buy an etching for your father
Etching of plastic substrates prior to their metallization
