Examples of 'fan cover' in a sentence
Meaning of "fan cover"
fan cover: A protective covering for a fan, typically used in electronic devices to prevent the fan from accumulating dust or debris. It ensures proper functioning and prolongs the lifespan of the fan. ~
How to use "fan cover" in a sentence
Basic
Advanced
fan cover
Install fan cover for blow mode or.
Install the unit on the motor fan cover.
Remove fan cover and clear throat.
Securely close the fan cover.
Save fan cover bracket for future.
Is accessible through the center of the fan cover.
When the fan cover is removed.
An exhaust opening is formed at a section of the fan cover.
Open the fan cover wide.
A fan cover is fitted to the motor.
Remove the nuts and remove the fan cover.
Close the fan cover correctly.
Verify the motor sense of rotating as indicated on the fan cover.
Replace the fan cover if it is provided with the.
Over and under closet in the kitchen as well as fan cover.
See also
Open the fan cover and remove the fan.
The centrifugal fan and the diffuser are covered by a fan cover.
The dirty fan cover can be washed with water or detergent.
Variable frequency drivers with wall mounting or on the motor fan cover.
To clean fan cover unplug the appliance and cool completely.
Align the rib on the flywheel with the notch on the fan cover.
Replace the fan cover and fasten it with the screws.
This is achieved preferably by use of a separate moulded part fitted to the fan cover.
Do not use the fan cover for transport or storage of the motors.
A guide post slidably extending to pass through the forced draft fan cover.
Make sure the motor fan and fan cover are kept clear of sawdust.
Eep the fan cover clean by using a vacuum cleaner and a stiff brush.
The vehicle may further comprise a fan cover adapted to cover the fan.
Unlatch the fan cover from the bottom of the vacuum housing by pressing.
Align the notch on the flywheel with the hole on top of the fan cover.
Wipe top of fan cover with a soapy damp cloth or sponge to remove any grease.
Align the notch on the flywheel fin with the mark on the fan cover.
Install fan cover for blower mode or vac tube not installed properly for vac mode.
Always use a stainless steel mounting ring if the motors fan cover is made of plastic.
To the motor fan cover and the cooling fins between the drive and the motor.
Correct operation is combined with the use of the lateral panels and catalytic fan cover.
Air duct cover Fan cover Air filter.
Check that the turning direction of the motor matches that specified on the fan cover.
A forced draft fan cover having a threaded hole formed with a threaded slot ; and.
Adjusting the braking torque Remove the cap on the fan cover.
Remove the motor fan cover from your 3-phase motor by removing the mounting screws.
Screws from the top center of the Fan Cover Bracket.
Use the fan cover screws to mount the fan cover / Hydrovar combination to the motor.
In convection ovens, remove the fan cover by.
Attach the Fan Cover Bracket to unit with the 2.
With a screwdriver, push into the side opening of the fan cover to release it.
This allows the fan cover 65 to be easily positioned.
When used as a blower, always install the blower tubes and close the fan cover.
Attach Fan Cover Bracket to unit with 3 screws, which were removed in Step 1 above.
NOTE, Unit will not operate in blow mode without fan cover in place.
You'll also be interested in:
Examples of using Cover
Show more
Remove the battery cover by sliding it downward
Cover and keep warm up to one hour
Unscrew the bulb cover by turning anticlockwise
Examples of using Fan
Show more
Big fan of you and your otters
We do not need to fan that flame today
Check fan blade screws for tightness
