Examples of 'grub screws' in a sentence
Meaning of "grub screws"
grub screws: Small set screws with either a flat or hexagonal point, commonly used to secure an object within or against another object. This phrase is often related to mechanical or construction contexts where these types of screws are utilized
How to use "grub screws" in a sentence
Basic
Advanced
grub screws
The grub screws should be on the underside.
Other adjustment mechanisms such as grub screws may of course be used.
Grub screws to adjust the height of the thick.
The means to level the upper platform comprise perimetral grub screws.
Lowermost grub screws must be put in place.
Make minor adjustments to the left and right grub screws to correct the.
Grub screws hexagon socket.
Align the two flats on the cutter shaft with the grub screws.
Loosen the grub screws and pull out the doors.
Use a 2mm hex driver to install and tighten the motor coupler grub screws.
The perimetral grub screws are at least three and are joined to the intermediate platform.
Replace the new pins, return to the original position and fasten with the grub screws.
The grub screws must interlock with the prepared groove of the motor shaft.
Also the saber came with nylon grub screws to hold the sections together.
The two grub screws then must interlock with the prepared indentations in the shaft.
See also
Note, Use a drop of thread lock on the grub screws before securing the linkage rod.
The grub screws have several benefits including,.
Reassemble and fasten down the arms using the supplied M8 grub screws.
Plate with grub screws for limit switch plates6.
Then secure the collar with two grub screws M3x3.
The screws and grub screws are included in the handle-kit.
Install the landing struts and attach the skids with the M3x3 grub screws.
Secure the cover with 3 grub screws already screwed on the support bracket.
The fusehead leads are held in position using the grub screws see Figure A7.3.
Loosen grub screws 2 and the pressure pins 1 remove them upwards.
A feeder as claimed in claim 1, characterised in that said appendices consist of grub screws ( 24 ).
These perimetral grub screws ( 11 ) also have locking nut and washer.
Slacken the grub screws ( r ) and position the rear support bearings ( q ) away from the blade fig . 7A.
In particular, the grub screws 59 are hollow and have frusto-conical heads facing the clamp body 35.
Loosen the grub screws at the front of the grille Allen key A / F 2.5.
You'll also be interested in:
Examples of using Screws
Show more
The screws are provided in the literature pack
Fully tighten screws with hex wrench
Screws are visible on the burner control panel
Examples of using Grub
Show more
Monitor for grub populations in late summer
And the girls is fixing the grub
The grub screws should be on the underside
