Examples of 'guard cover' in a sentence
Meaning of "guard cover"
Guard cover: This phrase refers to the protection or surveillance provided by a guard or security personnel to ensure safety or prevent unauthorized access
How to use "guard cover" in a sentence
Basic
Advanced
guard cover
National guard cover city for two days.
Close lower blade guard cover.
The guard cover can be changed to an optical fiber.
Remove or unlatch and pivot away wheel guard cover.
And remove the guard cover as shown in the figure.
Remove both retaining screws of the fixed guard cover.
Never use saw without guard cover plate securely in place.
The guard cover and connector plug may be integrally formed.
Always use the angle grinder with the disc guard cover in place.
The disc guard cover must be securely attached to the angle grinder.
Preferably, the front of the radiator is covered by a wind guard cover.
Put the blade guard cover back in place and tighten the screw.
Optionally, the connector plug and at least a part of the guard cover are integrally formed.
Preferably, the guard cover and connector plug are integrally moulded.
More preferably, the access aperture is defined by the resilient leg and the guard cover.
See also
Ensure that the disc guard cover 7 sits firmly on the spindle collar.
Close the clamping lever 8 to firmly clamp the disc guard cover 7 in place.
Turn the disc guard cover 5 into the desired position working position.
A speed selection chart ( E ) is located on the inside of the guard cover.
The adjustable disc guard cover 5 must always be in place when working with.
Advantageously, the flap 200 may be integrally formed or moulded with a guard cover.
The closed side of the disc guard cover 5 must always be facing the operator.
Advantageously, the flaps 340 may be integrally moulded with the guard cover.
The disc guard cover has 5 set positions.
Re-insert the 3 bolts, washers, lock washers, nuts, and tighten wheel guard cover in place.
The end face of the second guard cover is a second photo receiving section 91.
Tighten lock nut 14 with two-pin spanner through the opening of the wheel guard cover 3.
A first photo receiving guard cover 80 is located in front of the first photo receiving element 78.
When changing speeds, release belt tension and open belt and pulley guard cover ( D ) Fig . 30.
A second photo receiving guard cover 90 is fixed in front of the second photo receiving element 88.
The end face of the first photo receiving guard cover 80 is a first photo receiving section 81.
A second projecting guard cover 86 is fixed in front of the second emitting element 84.
The end face of the second projecting guard cover 86 is a second projecting section 87.
The end face of the guard cover 72 is a first projecting section 74.
You'll also be interested in:
Examples of using Cover
Show more
Remove the battery cover by sliding it downward
Cover and keep warm up to one hour
Unscrew the bulb cover by turning anticlockwise
Examples of using Guard
Show more
Lift both guard barriers to their up locked po
It says there is an armed guard in the hull
Guard protects hand from the blades
