Examples of 'hex wrench' in a sentence
Meaning of "hex wrench"
A hex wrench, also known as an Allen wrench, is a tool used to drive bolts and screws with hexagonal sockets. It is typically L-shaped and has a hexagonal shaft and a handle. This tool is commonly used in both professional and DIY settings for assembling and disassembling various objects
How to use "hex wrench" in a sentence
Basic
Advanced
hex wrench
Hex wrench for loosening control knobs.
Fully tighten screws with hex wrench.
With the hex wrench still in place.
Tighten securely with the hex wrench.
Use a hex wrench to remove the plug.
Tighten the screw using a hex wrench.
First use a hex wrench to loosen the screw.
Easy to adjust with a common hex wrench.
Use a hex wrench to remove the rear cover.
Loosen locking nuts with a hex wrench.
Hex wrench is stored on the tool.
Tighten with hex wrench supplied.
The hex wrench is stored as shown in the figure.
Loosen set screw using hex wrench provided.
Use the hex wrench to remove the accessory.
See also
Remove the hex bolts with hex wrench.
Place the hex wrench back in the case.
Loosen bolt on nose with provided hex wrench.
Socket wrench with hex wrench on its other end.
Remove the crank cap using a hex wrench.
Use the hex wrench to tighten the bolt securely.
Socket wrench with hex wrench.
Use a hex wrench to remove the motor housing cover.
And hand me that hex wrench.
Remove the hex wrench and replace the retaining screw.
Tighten the bolt securely with the hex wrench.
Hold hex wrench in place until blade retaining bolt is tightened.
Now tighten the screw with the hex wrench.
You never know when a hex wrench may come in handy.
Securely tighten the bolt using the hex wrench.
Store the hex wrench as shown in the figure when not in use.
Loosen the bolt with the hex wrench provided.
Insert the hex wrench into the hole in the offset base.
Tighten the bolt with the hex wrench firmly.
Place the hex wrench on the valve bar and turn counterclockwise.
Secure the bolt with the hex wrench securely.
A hex wrench for servicing the nailer is stored within the belt hook.
Reinstall the crank cap securely with the hex wrench.
Tighten hex screw with hex wrench provided with handle kit.
Then tighten the three screws with the hex wrench.
When the hex wrench is needed it can be pulled out of the wrench holder.
Tighten loose screws using the appropriate hex wrench or screwdriver.
Use the hex wrench to loosen the screw which secures the punch.
Tighten the fixing screw fully down with a hex wrench.
Loosely tighten with the supplied hex wrench for further adjustment.
If the lever becomes loose it can be tightened using the hex wrench.
Use the hex wrench to loosen the bolts which secure the die.
Loosen and remove the bolt with the hex wrench.
Put the hex wrench in the hole in the bottom of the adjustable foot.
Mounting of metal blade with the hex wrench still in place.
