Examples of 'inlet hoses' in a sentence
Meaning of "inlet hoses"
Inlet hoses: Inlet hoses are plumbing components used to bring water into a system or appliance, typically through an inlet valve. They are commonly found in household appliances such as washing machines and dishwashers, connecting the water supply to the respective appliances
How to use "inlet hoses" in a sentence
Basic
Advanced
inlet hoses
Place inlet hoses inside washer basket.
Disconnect and drain water inlet hoses.
Make sure inlet hoses are connected correctly.
Check if there is any kink in inlet hoses.
Connect the inlet hoses to the washer.
This washer does not include inlet hoses.
Place the inlet hoses in the basket.
Check all connections with inlet hoses.
Connect the inlet hoses to water faucets.
Inlet hoses with flat washers.
Damage to the inlet hoses can result.
Connect hot and cold water inlet hoses.
Place the inlet hoses into the basket.
Straighten the water inlet hoses.
Connect the inlet hoses to the water taps.
See also
Installing new water inlet hoses.
Disconnect water inlet hoses from faucets and drain.
Check for kinks in inlet hoses.
Inlet hoses are subject to damage and deterioration over time.
Reconnect water inlet hoses to faucets.
Check for leaks around faucets and inlet hoses.
Hot and cold inlet hoses have been installed incorrectly.
Pull out water inlet hoses.
Use the new inlet hoses supplied with washer.
A few seconds of fill is sufficient to empty the inlet hoses.
Check that the inlet hoses are not kinked or squashed.
Tools needed for connecting the water inlet hoses.
Remove the inlet hoses and other tub contents.
Insert a flatwasher into each end of the inlet hoses.
Make certain pump inlet hoses are clear and unblocked.
Check for leaks around taps and inlet hoses.
Connect the inlet hoses to the check valves on washer.
Turn the water faucets of and disconnect the inlet hoses.
Remove the inlet hoses from the plastic bag.
Insert a flat washer into each end of the inlet hoses.
Place inlet hoses and drain hose inside washer basket.
Check that hot and cold inlet hoses are not reversed.
Water inlet hoses can be drained by taking it out from tap.
Be sure the seals of the water inlet hoses are securely fitted.
The new inlet hoses supplied with this washer must be used.
Do not use old or used water inlet hoses on the new product.
Refer to section on water supply requirements before connecting water inlet hoses.
Place the end of the inlet hoses into a bucket or container.
Clean the inlet valve filter or reinstall the water inlet hoses.
Use the new inlet hoses provided with your dryer.
Insert new flat washers into each end of the inlet hoses.
Use only the inlet hoses provided with the washer.
Tools needed for connecting the drain hose and water inlet hoses.
Connect both provided inlet hoses to the hot and cold faucets.
Leakage caused by improper installation of water inlet hose or using other brand inlet hoses.
You'll also be interested in:
Examples of using Hoses
Show more
Disconnect hoses from used water tank
Water faucets beyond reach of fill hoses
Use hoses that are no longer than necessary
Examples of using Inlet
Show more
Attach inlet and discharge hoses to pump
Check and clean inlet hose screen
Place inlet hoses inside washer basket
