Examples of 'inlet temperatures' in a sentence
Meaning of "inlet temperatures"
Inlet temperatures refer to the temperature of the air or fluid entering a specific system or device
How to use "inlet temperatures" in a sentence
Basic
Advanced
inlet temperatures
For high compressed air inlet temperatures.
At higher inlet temperatures the conversion of propylene was significantly less.
The same was true for the inlet temperatures.
Deviating inlet temperatures affect the service life of the activated carbon.
This problem is especially marked at low water inlet temperatures.
Higher inlet temperatures would be economically desirable if spalling could still be avoided.
Each manufacturer has varying inlet temperatures for their equipment.
Measurements were done on a classic turbocharger test bench with different turbine inlet temperatures.
The use of high air inlet temperatures can thus lead to practically instant drying.
Similar performance maps could thus be generated for different inlet temperatures.
Reliable methods to derive turbine inlet temperatures are therefore crucial for operating a GT efficiently.
Values may differ for other dew points and gas inlet temperatures.
The subcooler can be used to control inlet temperatures to pumps, refrigerators or analytical instruments.
Existing natural gas power plant efficiency is critically dependent on turbine inlet temperatures.
The predicted turbine inlet temperatures are provided to the data trending and storage unit 230.
See also
Systems can be designed allowing operation with inlet temperatures outside this range.
Gas inlet temperatures greater than 200°C can result in thermal degradation and agglomeration of the flake.
Demonstration that insulin stability increases at higher inlet temperatures and atomization pressures.
During reforming, this loss of activity may be compensated for by raising reactor inlet temperatures.
For compressed air inlet temperatures of up to 100 C.
To avoid thermal damage to the protective coatings, ga s inlet temperatures are limited to 260ºC.
To avoid thermal damage to the protective coatings, gas inlet temperatures are limited to 260ºC.
Operation is possible at brine inlet temperatures of up to +35 C.
You'll also be interested in:
Examples of using Temperatures
Show more
Low temperatures have an effect on vehicle start up
Thermal readings show temperatures increasing rapidly
Temperatures at which the battery can be recharged
Examples of using Inlet
Show more
Attach inlet and discharge hoses to pump
Check and clean inlet hose screen
Place inlet hoses inside washer basket
