Examples of 'knurled' in a sentence
Meaning of "knurled"
knurled (verb): To cut or shape with a series of small ridges or knobs for decoration or better grip. It is commonly used in craftsmanship or engineering to describe the process of adding texture or grip to a surface
Show more definitions
- simple past tense and past participle of knurl
How to use "knurled" in a sentence
Basic
Advanced
knurled
Knurled clamp area for optimal stability.
After loosening the two knurled nuts.
Turn the knurled nuts on the base of.
Securely tighten the two knurled thumbscrews.
It is knurled on the side that has no text.
Optimum contact through knurled contact surfaces.
The plastic strip can be smooth or knurled.
Grasp knurled knob on drain valve.
The cellular material is connected to a knurled wheel.
Turn the knurled nut towards the flash.
Alternatively said roller has a knurled surface.
Tighten the knurled nuts securely.
It is preferred that the coating is of knurled pattern.
Hold knurled nut until glows the catalyst.
At the top there should be a knurled nut.
See also
Adjustment by screw knurled and reset in any position.
A knurled nut is a nut with a knurled outside surface.
Carefully reinstall the knurled wick adjustment knob.
Hold knurled screw base of elastic suspension firmly.
The spacing of the brushes is adjustable by a knurled screw.
Screw the knurled nut of the adapter as far as.
Lift canopy and install knurled nuts as shown.
Rotate knurled collar until it locks into place.
Rotary knob with knurled screw.
Fully knurled tip ensures ultimate holding capacity.
Remove the two knurled screws.
A crossed knurled part comprises two series of striations.
The eyepiece adapter has a knurled ring included.
Knurled screws as per the needs of the customer.
May have a knurled external surface.
Knurled grip handle for more secure grip.
Column by tightening up the knurled screw.
Unscrew the knurled nut of the solenoid coil.
Pass the composite structure through knurled rolls.
Turn knurled screw c so far clockwise till a resistance is felt.
Some have handles or knurled grips.
Knurled retaining nut for plastic nozzles with tip.
The periphery of the wheel is knurled.
Tighten the knurled screw and recheck the balance.
At least one of the fins is knurled.
Push the knurled nut upward to open ignition holes.
Fit the cover and tighten both knurled nuts.
Then retighten the knurled screw of the depth stop.
The knurled portion should be fully inside the tube.
Oven and undo the knurled nut at the front.
Knurled left grip area for maximum grip adhesion.
Pull out the knurled screw and fold over.
Remove tip and tip housing by untightening knurled screw.
Tighten the knurled ring to securely reconnect the microphone.
Loosen thumb screw and turn knurled knob to move.
